800-012 Datasheet, PDF (1/1 Pages) Glenair, Inc. – PC Tail or Solder Cup PCB Receptacle

Series 800 Mighty Mouse UN Mating Thread
PC Tail or Solder Cup PCB Receptacle
800-012 and 800-040 Ordering Information
Printed Circuit Board/ Solder Cup Receptacles feature low profile shells for
minimum protrusion inside enclosures and integral board standoffs. Contacts are
non-removable.
Water Immersion, Unmated Specify 800-012 connectors for applications where
open face water immersion is not a requirement. For MIL-STD-810 Method 512G
immersion requirements, specify 800-040 watertight connectors . These 800-040­­
connectors are specially sealed (“MOD-518”) and are 100% tested to maintain a
helium leak rate of 1 x 10^-4 cc/second at one atmosphere pressure differential from
-40C to +70C.
How To Order
Sample Part Number
C
Series
800-012 -07 M 7-10 P Z
800-012 = Receptacle for Solder Cup or PCB Termination, with Standard
Epoxy Potting
800-040 = Receptacle for Solder Cup or PCB Termination, With Special
“MOD-518” Sealing For Open Face (Unmated) Water Immersion
Requirements. 100% Leak Tested.
Shell Style (See Table I)
-02 = Square Flange
-07 = Jam Nut (See Jam Nut Panel Cutout Dimensions Page C-3)
Shell Material and Finish
Shell Size - Insert
Arrangement
Contact Type
Shell Key Position
(See Table II)
C = Aluminum / Black Anodize (Non-Conductive) RoHS Compliant
M = Aluminum / Electroless Nickel RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
MT = Aluminum / Nickel-PTFE RoHS Compliant
Z1 = Stainless Steel / Passivated RoHS Compliant
See Contact Arrangements page C-2
P = Pin, PC Tail
S = Socket , PC Tail
E = Pin, Solder Cup
F = Socket, Solder Cup
N = Normal  X = Pos. X  Y = Pos. Y  Z = Pos. Z
Table I: Shell Style
-02
Square Flange Front Mount
-07
Jam Nut for Rear Panel
Mounting
Recommended Panel Cut Out
ØM
N Flat ± .002
in
mm
in
mm
øM
5
.318
8.08 .297/.292 7.54/7.42
6
.386 9.80 .365/.360 9.27/9.14
7
.449 11.40 .429/.424 10.90/10.77
8
.510 12.95
.483
12.67
9
.574 14.58
.540
13.71
10
.635
16.13
.614
15.60
12
.760 19.30
.722
18.34
N FLAT
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
C-12
E-Mail: [e-mail]