790-066 Datasheet, PDF (1/5 Pages) Glenair, Inc. – Micro-Crimp Rear Panel Mount

790-066
Series 79 Micro-Crimp Rear Panel Mount
Hermetic Receptacle, Pin Face
with Solder Cups
Basic
Part Number
Shell Size
Table I
Page L-11
Mating Hardware Option
N = No Hardware
P = Jackpost
G = Male Guide Pins
S = Female Guide Sockets
See Page L-12
790-066 Z1 K - 9P9 N
2-56 UNC-2B
X .129 MPT
Typ 2 Pl
H Thd 2 Pl
.190 MPT
2-56 UNC-2B
X .129 MPT
Typ 2 Pl
.250 (6.35)
Finish
Z1 = Passivate
ZL = Nickel Plate
Basic
D
Max
Arrangement
See Page L-5
(Pin with Solder
Cup Only)
.308 (7.82)
Max
.371 .610
.365 Max
.510
(12.95)
Max
.099
.089
(2.51)
(2.26)
C
Basic
A
Max
C
Basic
F
Max
.100 (2.54)
.200
Max
L
.190
(5.08)
(4.83)
.310 (7.87)
Max
Shell Sizes A, B, C, D, E, F, J, & K
See Table I For Dimensions
Page L-11
.300 (7.62)
Max
.215 (5.46)
Max
Full Radius
E
Typ 2 Pl
Max
G
Max
APPLICATION NOTES
1. Material/Finish:
4. Test Criteria:
Shell* - 300 Series CRES/passivate or
Hermeticity - <1 x 10^-7 scc He/sec @1 ATM Delta
300 Series CRES/Nickel Plate
Contacts - Nickel iron alloy/gold plate
DWV - #23 pins: 500 VAC pin-to-shell
#16 pins: 1000 VAC pin-to-shell
Insulator - Individual glass beads/N.A.
#12 pins: 1000 VAC pin-to-shell
Seals - Fluorosilicone blend/N.A.
I.R. - 5,000 megohms minimum @500 VDC
Mating Hardware - CRES/passivated
*Consult factory for other shell finishes and O-Ring materials.
5.
Glenair 790-066 will mate with any series 79 plug with socket
contacts and same shell and insert, and is designed to utilize
2. Metric dimensions (mm) are indicated in parentheses.
799-016 EMI backshells.
3. See Pages L-3 and L-4 for panel cut-out information.
© 2013 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
L-9
E-Mail: [e-mail]