790-042S-L6P6ME Datasheet, PDF (1/10 Pages) Glenair, Inc. – Right Angle Printed Circuit Board Connectors

Series 79 Micro-Crimp
Section G: Right Angle Printed Circuit Board Connectors
Board Mount Plugs, Socket Contacts, 90° PCB Termination, 790-042S
A ^{Free-standing rugged right angle headers feature gold-plated PC tail contacts for}
thru-hole printed circuit board termination. Not for panel mounting. Contacts are
permanently installed and are sealed with epoxy. Shells are aluminum alloy. EMI
shroud improves shielding performance. Threaded board mounting holes and integral
standoffs simplify installation. Available in 29 different contact arrangements, these
B ^{connectors feature size #23 signal contacts along with #16 and #12 power contacts for}
up to 23 amps current rating. Optional EMI spring improves shell-to-shell conductivity
and shielding performance. Mates with 790-024p cable receptacles.
How To Order
Sample Part Number
790-042S
L-6P6
M
E
P
A
C
Part Number
Shell Size -
Insert Arr.
Shell Finish
790-042S
Right Angle Plug with
90° PC Tail Contacts
for Termination to
Backplanes or Flexible
Circuits
See Table 1
for Available
Insert
Arrangements
M
Electroless Nickel
general purpose
applications
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
ZNU
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective black)
EMI Spring
E
EMI Spring
N
No Spring
EMI
SPRING
Hardware Option PC Tail Length
a
D
.125 Inch (3.2 mm.)
N
No Hardware
B
.250 inch (6.4 mm.)
E
P
Female Jackpost
PC TAIL
LENGTH
F
Additional shell
finishes are listed on
page C-9.
G
Specifications
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Materials and Finishes
Shell
Contacts
Insulator
PCB Tray
EMI Shroud
Hardware
Panel Gasket
Encapsulant
Aluminum alloy
H
Copper alloy, gold plated
Liquid crystal polymer (LCP)
Thermoplastic
Aluminum alloy
300 series stainless steel
Fluorosilicone, conductive
Epoxy
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-21
Rev. 04-July-2009
E-Mail: [e-mail]