790-041PJ25P2M Datasheet, PDF (1/10 Pages) Glenair, Inc. – Right Angle Printed Circuit Board Connectors

Series 79 Micro-Crimp
Section G: Right Angle Printed Circuit Board Connectors
Receptacles With Pin Contacts, Right Angle PCB Termination, 790-041P
A
Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole
printed circuit board termination. 790-041P connectors are free-standing (not for panel
mounting) and mate to 790-025S cable plugs. Contacts are permanently installed and
are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting holes
and integral standoffs simplify installation. EMI shroud improves EMI performance.
B
Fluorosilicone face seal provides watertight interface. Available in 29 different contact
arrangements, these connectors feature size #23 signal contacts along with #16 and #12
power contacts for up to 23 amps current rating.
How To Order
C
790-041P
J-25P2
Sample Part Number
M
P
Part Number
Shell Size -
Insert Arr.
Shell Finish
D
790-041P
See Table 1 for
M
Header Receptacle
Available Insert
Electroless Nickel
with 90° PC Tail Pin
Arrangements general purpose applications
Contacts for Termination
to Backplanes or Flexible
Circuits
E
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion protection
and durability
(non-reflective grey)
ZNU
Zinc-Nickel with Black
F
Chromate
tactical applications
(non-reflective black)
Hardware Option
N
No Hardware
P
Female Jackpost
Additional shell finishes are
listed on page C-9.
G
A
PC Tail Length
a
.125 Inch (3.2 mm.)
B
.250 inch (6.4 mm.)
PC TAIL
LENGTH
Specifications
H ^{Current Rating}
#23 5 AMPS, #16 13 A., #12 23 A.
Dielectric Withstanding #23 500 VAC RMS, #12 and #16
Voltage
1800 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +150° C.
Shock
300 g.
Vibration
37 g.
Materials and Finishes
Shell
Contacts
Insulator
EMI Shroud
Interfacial Seal
Jackposts
Tray
Encapsulant
Aluminum alloy
Copper alloy, 50 microinches gold
plated
Liquid crystal polymer (LCP)
Aluminum alloy
Flourosilicone rubber
300 series stainless steel
Thermoplastic
Epoxy
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-6
Rev. 04-July-2009
E-Mail: [e-mail]