790-037SH-5P5MENA Datasheet, PDF (1/11 Pages) Glenair, Inc. – Right Angle Printed Circuit Board Connectors

Series 79 Micro-Crimp
Section G: Right Angle Printed Circuit Board Connectors
Panel Mount Plugs, Socket Contacts, 90° PCB Termination, 790-037S
A
Lightweight, rugged right angle headers feature gold-plated PC tail contacts for thru-
hole printed circuit board termination. 790-037S connectors are designed for rear-panel
mounting and are supplied with conductive panel gaskets. Contacts are permanently
installed and are sealed with epoxy. Shells are aluminum alloy. EMI shroud improves
shielding performance. Threaded board mounting holes and integral standoffs simplify
B
installation. Available in 29 different contact arrangements, these connectors feature
size #23 signal contacts along with #16 and #12 power contacts for up to 23 amps
current rating. Optional EMI spring improves shell-to-shell conductivity and shielding
performance.
How To Order
C
790-037S
H-5P5
Sample Part Number
M
E
P
B
Part Number
Shell Size -
Insert Arr.
Shell Finish
D
790-037S
See Table 1
M
Rear Panel Mounted for Available Electroless Nickel
Plug with 90° PC Tail
Insert
Contacts for Termination Arrangements
general purpose
applications
to Backplanes or Flexible
Circuits
E
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
ZNU
F
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective black)
EMI Spring
E
EMI Spring
N
No Spring
Hardware Option PC Tail Length
N
No Hardware
a
.125 Inch (3.2 mm.)
B
.250 inch (6.4 mm.)
EMI
SPRING
G
Guide Pin
PC TAIL
LENGTH
P
Female Jackpost
Additional shell
G
finishes are listed on
page C-9.
S
Female Guide Socket
Specifications
H ^{Current Rating}
#23 5 AMPS, #16 13 A., #12 23 A.
Dielectric Withstanding #23 500 VAC RMS, #12 and #16
Voltage
1800 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +150° C.
Shock
300 g.
Vibration
37 g.
Materials and Finishes
Shell
Contacts
Insulator
PCB Tray
EMI Shroud
Hardware
Panel Gasket
Encapsulant
Aluminum alloy
Copper alloy, gold plated, with
stainless steel hood
Liquid crystal polymer (LCP)
Thermoplastic
Aluminum alloy
300 series stainless steel
Fluorosilicone, conductive
Epoxy
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-16
Rev. 04-July-2009
E-Mail: [e-mail]