790-036PD-7P2MNA Datasheet, PDF (1/11 Pages) Glenair, Inc. – Right Angle Printed Circuit Board Connectors

Series 79 Micro-Crimp
Section G: Right Angle Printed Circuit Board Connectors
Panel Receptacles With Pin Contacts, Right Angle PCB Termination, 790-036P
A ^{Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole}
printed circuit board termination. 790-036P connectors are designed for rear-panel
mounting and are supplied with conductive panel gaskets. Contacts are permanently
installed and are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting
holes and integral standoffs simplify installation. EMI shroud improves EMI performance.
B ^{Fluorosilicone face seal provides watertight interface. Available in 29 different contact}
arrangements, these connectors feature size #23 signal contacts along with #16 and #12
power contacts for up to 23 amps current rating.
790-036P
Part Number
D-7P2
Shell Size -
Insert Arr.
How To Order
Sample Part Number
MT
P
Shell Finish
Hardware Option
A
C
PC Tail Length
790-036P
Rear-Panel Mounted
Receptacle with 90° PC
Tail Pin Contacts for
Termination to Backplanes
or Flexible Circuits
See Table 1 for
Available Insert
Arrangements
M
Electroless Nickel
general purpose applications
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
Additional shell finishes
are listed on page C-9.
N
No Hardware
G
Guide Pin
P
Female Jackpost
a
.125 Inch (3.2 mm.)
D
B
.250 inch (6.4 mm.)
PC TAIL
LENGTH
E
F
S
G
Female Guide Socket
Specifications
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Materials and Finishes
Shell
Contacts
Aluminum alloy
H
Copper alloy, 50 microinches gold
plated
Insulator
Interfacial Seal
Hardware
Panel Gasket
Encapsulant
Liquid crystal polymer (LCP)
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
Epoxy
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-1
Rev. 04-July-2009
E-Mail: [e-mail]