790-029SK-43MENA Datasheet, PDF (1/11 Pages) Glenair, Inc. – Straight Printed Circuit Board Connectors

Series 79 Micro-Crimp
Section F: Straight Printed Circuit Board Connectors
Panel Plugs With Socket Contacts, Straight PCB Termination, 790-029S
A
Lightweight, rugged vertical mount headers feature gold-plated PC tail contacts for
thru-hole printed circuit board termination. 790-029S connectors are designed for
rear-panel mounting and are supplied with conductive panel gaskets. Contacts are
permanently installed and are sealed with epoxy. Shells are aluminum alloy. Threaded
board mounting holes and integral standoffs simplify installation. Available in 29
B
different contact arrangements, these connectors feature size #23 signal contacts
along with #16 and #12 power contacts for up to 23 amps current rating. Optional EMI
spring improves shell-to-shell conductivity and shielding performance. Stainless steel
jackposts are non-removable.
How To Order
C
790-029S
K-43
Sample Part Number
M
E
P
B
Part Number
Shell Size -
Insert Arr.
Shell Finish
D
790-029S
See Table 1
M
Rear Panel Mounted for Available Electroless Nickel
Plug with Straight PC Tail
Insert
Contacts for Termination Arrangements
general purpose
applications
to Backplanes or Flexible
Circuits
E
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
ZNU
F
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective black)
Additional shell
G
finishes are listed on
page C-9.
EMI Spring Hardware Option PC Tail Length
E
EMI Spring
N
No Spring
N
No Hardware
a
.125 Inch (3.2 mm.)
B
.250 inch (6.4 mm.)
EMI
SPRING
G
Guide Pin
PC TAIL
LENGTH
P
Female Jackpost
S
Female Guide Socket
H
Specifications
Materials and Finishes
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulator
Hardware
Panel Gasket
Encapsulant
Aluminum alloy
Copper alloy, 50 microinches gold
plated, with stainless steel hoods
Liquid crystal polymer (LCP)
300 series stainless steel
Fluorosilicone, conductive
Epoxy
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
F-16
Rev. 04-July-2009
E-Mail: [e-mail]