790-028PJ-25P2MNA Datasheet, PDF (1/11 Pages) Glenair, Inc. – Straight Printed Circuit Board Connectors

Series 79 Micro-Crimp
Section F: Straight Printed Circuit Board Connectors
Panel Receptacles With Pin Contacts, Straight PCB Termination, 790-028P
A ^{790-028P connectors are designed for rear-panel mounting and are supplied with}
conductive panel gaskets. These connectors feature machined aluminum shells,
fluorosilicone face seals and straight printed circuit board contacts. Contacts are
epoxy-encapsulated and are non-removable. Contacts are gold plated. Connector
shells provide blind threaded holes for attaching to panel and to printed circuit board.
B ^{Available in 29 different insert arrangements, these connectors feature size #23 contacts}
for signal and data. For higher current applications, size #16 contacts provide up to 13
amps and size #12 contacts handle up to 23 amps.
790-028P
Part Number
790-028P
Rear Panel Mounted
Receptacle with PC
Tail Pin Contacts
for Termination
to Backplanes or
Flexible Circuits
J-25P2
Shell Size -
Insert Arr.
See Table 1 for
Available Insert
Arrangements
How To Order
Sample Part Number
M
P
Shell Finish
Hardware Option
M
Electroless Nickel
general purpose applications
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion protection
and durability
(non-reflective grey)
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
Additional shell finishes are
listed on page C-9.
N
No Hardware
G
Guide Pin
P
Female Jackpost
S
Female Guide Socket
A
C
PC Tail Length
a
D
.125 Inch (3.2 mm.)
B
.250 inch (6.4 mm.)
E
PC TAIL
LENGTH
F
G
Specifications
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Materials and Finishes
Shell
Contacts
Aluminum alloy
H
Copper alloy, 50 microinches gold
plated
Insulators
Retention Clips
Interfacial Seal
Hardware
Panel Gasket
Encapsulant
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
Epoxy
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
F-1
Rev.04-July-2009
E-Mail: [e-mail]