790-027SH-66MEN Datasheet, PDF (1/5 Pages) Glenair, Inc. – Panel Mount Connectors, Crimp Termination

Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
Panel Plugs With Socket Contacts, Crimp Termination, 790-027S
A
790-027S connectors are designed for rear-panel mounting and are supplied with
conductive panel gaskets. These connectors feature machined aluminum shells and wire
grommets for environmental protection. Contacts are rear-release snap-in crimp type.
Connectors are supplied with crimp contacts packaged separately. Size #23 signal pins
accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts
B
accept #12-14 AWG wire. Size 12 and 16 cavities also accept coaxial contacts purchased
separately. Attach optional shielding adapters (799-016) for EMI protection.
C _790-027S
H-66
How To Order
Sample Part Number
M
D
E
F
G
Part Number
Shell Size -
Insert Arr.
Shell Finish
790-027S
Rear Panel Mounted
Plug with Socket
Contacts
See Table 1 for
Available Insert
Arrangements
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in
the insert arrangement.
Example:
36P2 is supplied with 2
power pins.
36W2 is supplied less
the power pins.
M
Electroless Nickel
general purpose applications
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
See Section B for
coaxial contacts
purchased separately.
Additional shell finishes
are listed on page C-9.
E
EMI Spring
E
EMI Spring
N
No Spring
EMI
SPRING
P
Hardware Option
N
No Hardware
G
Guide Pin
P
Female Jackpost
S
Female Guide Socket
H
Specifications
Current Rating
#23 5 AMPS, #16 13 A., #12 23 A.
Dielectric Withstanding #23 500 VAC RMS, #12 and #16
Voltage
1800 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +150° C.
Shock
300 g.
Vibration
37 g.
Materials and Finishes
Shell
Contacts
Insulators
Retention Clips
Grommet
Hardware
Panel Gasket
Aluminum alloy
Copper alloy, 50 microinches gold
plated, stainless steel hood
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
Fluorosilicone, conductive
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
E-6
Rev. 04-July-2009
E-Mail: [e-mail]