790-026PL-6P6MN Datasheet, PDF (1/5 Pages) Glenair, Inc. – Panel Mount Connectors, Crimp Termination

Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
Panel Receptacles With Pin Contacts, Crimp Termination, 790-026P
A ^{790-026P connectors are designed for rear-panel mounting and are supplied with}
conductive panel gaskets. These connectors feature machined aluminum shells,
fluorosilicone face seals and wire grommets for environmental protection. Contacts are
rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged
separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept
B ^{#16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities}
also accept coaxial contacts purchased separately. Attach optional shielding adapters
(799-016) for EMI protection.
How To Order
Sample Part Number
790-026P
L-6P6
MT
G
C
Part Number
Shell Size -
Insert Arr.
Shell Finish
790-026P
Rear Panel Mounted
Receptacle with Pin
Contacts
See Table 1 for
Available Insert
Arrangements
M
Electroless Nickel
general purpose applications
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
Example:
36P2 is supplied with 2
power pins.
36W2 is supplied less
the power pins.
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion protection
and durability
(non-reflective grey)
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
See Section B for
coaxial contacts
purchased separately.
Additional shell finishes are
listed on page C-9.
Hardware Option
D
N
No Hardware
P
Female Jackpost
E
G
Guide Pin
S
F
Female Guide Socket
G
Specifications
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Materials and Finishes
H
Shell
Aluminum alloy
Contacts
Copper alloy, 50 microinches gold
plated
Insulators
Liquid crystal polymer (LCP)
Retention Clips
Beryllium copper alloy
Interfacial Seal, Grommet Flourosilicone rubber
Hardware
300 series stainless steel
Panel Gasket
Fluorosilicone, conductive
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
E-1
Rev. 04-July-2009
E-Mail: [e-mail]