790-025SH-5P5EMN Datasheet, PDF (1/3 Pages) Glenair, Inc. – Cable Connectors, Crimp Termination

Series 79 Micro-Crimp
Section D: Cable Connectors, Crimp Termination
Cable Plugs with Socket Contacts, Crimp Termination, 790-025S
A
790-025S connectors feature machined aluminum shells and wire grommets for
environmental protection. Contacts are rear-release snap-in crimp type. Connectors are
supplied with crimp contacts packaged separately. Size #23 signal pins accept up to #22
AWG wire. Size #16 contacts accept #16-18 AWG wire. Size #12 contacts accept #12-14
AWG wire. Size 12 and 16 cavities also accept coaxial contacts purchased separately.
B
Connector shell features a groove for attachment of a low-profile EMI adapter 799-015,
ordered separately.
C ^790-025S
Part Number
H-5P5
Shell Size -
Insert Arr.
How To Order
Sample Part Number
E
M
EMI Spring Shell Finish
S
Hardware Option
D
E
F
G
790-025S
Cable Plug With
Socket Contacts
See Table 1 for
Available Insert
Arrangements
To order a connector
without size #16
or #12 power pins,
substitute “W”
instead of “P” in the
insert arrangement.
Example:
36P2 is supplied with
2 power pins.
36W2 is supplied
less the power pins.
See Section
B for coaxial
contacts purchased
separately.
E
EMI Spring
N
No Spring
EMI Spring
M
Electroless Nickel
general purpose
applications
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and
durability
(non-reflective grey)
N
Thru-Hole
No Hardware
ZNU
Zinc-Nickel with
Black Chromate
tactical applications
(non-reflective black)
L
Low-Profile Captivated
Jackscrew, Hex Head
P
Female Jackpost
K
Slot-Head Extended
Jackscrew
Additional shell
finishes are listed on
page C-9.
S
Low-Profile Captivated
Screwlock, Hex Head
T
Slot-Head Extended
Captivated Screwlock
H
Specifications
Materials and Finishes
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulators
Retention Clips
Grommet
Hardware
Aluminum alloy
Copper alloy, 50 microinches gold
plated, stainless steel hood
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-4
Rev. 04-July-2009
E-Mail: [e-mail]