790-024PC-13MN Datasheet, PDF (1/3 Pages) Glenair, Inc. – Cable Connectors, Crimp Termination

Series 79 Micro-Crimp
Section D: Cable Connectors, Crimp Termination
Cable Receptacles With Pin Contacts, Crimp Termination, 790-024P
A ^{Rugged, lightweight 790-024P connectors feature machined aluminum shells,}
fluorosilicone face seals and wire grommets for environmental protection. Contacts are
rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged
separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept
#16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities
B ^{also accept coaxial contacts purchased separately. Connector shell features a groove}
for attachment of a low-profile EMI backshell adapter 799-015, ordered separately.
How To Order
Sample Part Number
790-024P
C-13
M
P
C
Base Part
Number
Shell Size -
Insert Arr.
Shell Finish
Hardware Option
790-024P
Cable Receptacle
with Pin Contacts
See Table 1 for
Available Insert
Arrangements
. To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
Example:
M
Electroless Nickel
general purpose
applications
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-reflective grey)
36P2 is supplied with 2
power pins.
36W2 is supplied less
the power pins.
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-reflective black)
See Section B for
coaxial contacts
purchased separately.
Additional shell
finishes are listed on
page C-9.
N
Thru-Hole
No Hardware
L
Low-Profile Captivated
Jackscrew, Hex Head
D
P
Female Jackpost
E
K
Slot-Head Extended
F
Jackscrew
G
S
Low-Profile Captivated
Screwlock, Hex Head
T
Slot-Head Extended
Captivated Screwlock
Specifications
Materials and Finishes
H
Current Rating
Dielectric Withstanding
Voltage
Insulation Resistance
Operating Temperature
Shock
Vibration
#23 5 AMPS, #16 13 A., #12 23 A.
#23 500 VAC RMS, #12 and #16
1800 VAC RMS
5000 megohms minimum
-65° C. to +150° C.
300 g.
37 g.
Shell
Contacts
Insulators
Retention Clips
Interfacial Seal, Grommet
Hardware
Aluminum alloy
Copper alloy, 50 microinches gold
plated
Liquid crystal polymer (LCP)
Beryllium copper alloy
Flourosilicone rubber
300 series stainless steel
© 2009 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-1
Rev. 04-July-2009
E-Mail: [e-mail]