770-001 Datasheet, PDF (1/3 Pages) Glenair, Inc. – Shrink Boot

770-001
Shrink Boot
Heat Shrink Molded Part
Product Series
Angular
Function
A - 90°
B - 45°
S - Straight
Part Size
(See Table I)
Adhesive Lined
W1 - Zero Halogen
W2 - 80°C Hot Melt
R - 150°C Epoxy Pre-Coat
(Omit for No Adhesive)
770 - 001 A 1 00 W1
Basic Part Number
001 - Lipped Boot with Eyelet
002 - Short Lipped Boot with Eyelet
003 - Lipped Boot
004 - Short Lipped Boot
005 - Non-Lipped Boot
Material
1 - 150°C Compound 2025 Elastomeric
Oil Resistant and Flame Retardant
2 - Low Smoke Hazard Material
3 - Flexible Polyolefin
Ce
Ae
Ce
Ae
Ø.079 (2.0) Ref
(See Note 3)
As Supplied
P0
R0
Cr
Ct
C0
Recovered (-001)
S - Straight
Shrink Boot
As Supplied
P1
Ar
At
Cr
Ar
Ct
C0
At
Recovered (-002)
TABLE I: STRAIGHT BOOT DIMENSIONS, BOOT AND SHELL SIZE
Boot Shell Ae Dia
Ce Dia
Ar Dia
at
Cr Dia
ct
CO
PO
P1
Size Size Min
Min
Max
±30%
Max
±20%
Ref
±10%
±10%
00 5 .354 (9.0) .354 (9.0) .217 (5.5) .039 (1.0) .079 (2.0) .028 (0.7) .295 (7.5) .984 (25.0) N/A
RO
Ref
.551 (14.0)
01 5, 6 .472 (12.0) .472 (12.0) .276 (7.0) .043 (1.1) .118 (3.0) .028 (0.7) .295 (7.5) .984 (25.0) N/A .551 (14.0)
02 6, 7 .669 (17.0) .669 (17.0) .276 (7.0) .051 (1.3) .138 (3.5) .028 (0.7) .395 (10.0) 1.181 (30.0) N/A .728 (18.5)
03 8, 10 .945 (24.0) .945 (24.0) .413 (10.5) .063 (1.6) .197 (5.5) .035 (0.9) .395 (10.0) 1.496 (38.0) 1.024 (26.0) .748 (19.0)
04 11-16 1.181 (30.0) 1.181 (30.0) .551 (14.0) .071 (1.8) .236 (6.0) .039 (1.0) .630 (16.0) 2.165 (55.0) 1.693 (43.0) 1.181 (30.0)
05 16-17 1.260 (32.0) 1.260 (32.0) .709 (18.0) .071 (1.8) .276 (7.0) .047 (1.2) .748 (19.0) 2.638 (67.0) 1.850 (47.0) 1.299 (33.0)
06 17-21 1.417 (36.0) 1.417 (36.0) .886 (22.0) .079 (2.0) .335 (8.5) .047 (1.2) .787 (20.0) 3.150 (80.0) 2.362 (60.0) 1.575 (40.0)
07 21-23 1.693 (43.0) 1.693 (43.0) 1.102 (28.0) .087 (2.2) .394 (10.0) .051 (1.3) 1.142 (29.0) 3.898 (99.0) 3.150 (80.0) 2.165 (55.0)
08 25 2.362 (60.0) 2.362 (60.0) 1.378 (35.0) .130 (3.3) .591 (15.0) .063 (1.6) 1.575 (40.0) 5.118 (130.0) 4.331 (110.0) 1.969 (50.0)
APPLICATION NOTES
1. Material: Fluid resistant elastomer - Glenair Material Type 1.
2. When the minimum number of conductors are used, wire bundle/cable may require build-up to B² max.
3. Sizes 00 to 02 do not contain eyelet.
H
© 2010 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
H-5
E-Mail: [e-mail]