710-106 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Metal "Y" and "T" Transitions

710-106/107/370 and 710-108/109/371
Metal "Y" and "T" Transitions
for Series 72 & 74 Tubing and Series 75 Conduit
"Y" Transitions
710-106/107/370
E
"B" END
"T" Transitions
710-108/109/371
"B" END
G
"A" END
"C" END
"A"
END
"C"
END
F
D
H THREAD
H THREAD
710 - 106 M A24 B08 C16
TABLE I
Product
Series
Y Transition Material
106 = Aluminum
107 = Brass
370 = Stainless Steel
"C" End
Conduit Dash
No.
"B" End
Conduit Dash
No.
SYMBOL FINISH
B Olive Drab over Cadmium Plate
J
Gold Iridite over Cadmium Plate over Nickel
M Electroless Nickel
N Olive Drab over Cadmium Plate over Nickel
NC Zinc-Cobalt, Olive Drab
T Transition Material
108 = Aluminum
109 = Brass
371 = Stainless Steel
"A" End
Conduit Dash
No.
Finish (Table I)
NF Olive Drab over Cadmium Plate over
Electroless Nickel (500 Hour Salt Spray)
T Bright Dip Cadmium Plate over Nickel
Z1 Passivate
Metric dimensions (mm) are in parentheses.
TABLE II
CONDUIT
DASH AVAILABILITY
H THREAD
D
E
F
NO. 72 74 75
CLASS 2A
MAX
MAX
MAX
06
06
7/16 - 28 UNEF 1.97 (50.0) 1.20 (30.5) 1.33 (33.8)
08
08
1/2 - 20 UNF 1.97 (50.0) 1.20 (30.5) 1.35 (34.3)
09
09 09
9/16 - 24 UNEF 2.13 (54.1) 1.30 (33.0) 1.43 (36.3)
10
10
9/16 - 24 UNEF 2.13 (54.1) 1.30 (33.0) 1.43 (36.3)
12 12 12 12
5/8 - 24 UNEF 2.22 (56.4) 1.34 (34.0) 1.47 (37.3)
14
14
11/16 - 24 UNEF 2.37 (60.2) 1.49 (37.8) 1.58 (40.1)
16 16 16 16
3/4 - 20 UNEF 2.37 (60.2) 1.49 (37.8) 1.65 (41.9)
20 20 20 20
7/8 - 20 UNEF 2.69 (68.3) 1.70 (43.2) 1.78 (45.2)
24 24 24 24
1 - 20 UNEF 2.75 (69.9) 1.84 (46.7) 1.85 (47.0)
28 28 28
1 3/16 - 18 UNEF 3.06 (77.7) 2.09 (53.1) 2.09 (53.1)
32 32 32 32
1 5/16 - 18 UNEF 3.28 (83.3) 2.23 (56.6) 2.43 (61.7)
40 40 40 40
1 1/2 - 18 UNEF 3.59 (91.2) 2.50 (63.5) 2.65 (67.3)
48
48 48
1 3/4 - 18 UNS 4.23 (107.4) 2.96 (75.2) 3.15 (80.0)
56
56 56
2 - 18 UNS 5.00 (127.0) 3.50 (88.9) 3.40 (86.4)
64
64 64
2 1/4 - 16 UN
5.00 (127.0) 3.50 (88.9) 3.75 (95.3)
80
80
2 3/4 - 16 UN
5.70 (144.8) 4.10 (104.1) 4.25 (108.0)
*
* Consult factory for adapters using 3.000 inch (76.2) conduit
© 2003 Glenair, Inc.
CAGE Codes 06324
G
MAX
.81 (20.6)
.84 (21.3)
.88 (22.4)
.88 (22.4)
.91 (23.1)
.94 (23.9)
.94 (23.9)
1.03 (26.2)
1.13 (28.7)
1.16 (29.5)
1.16 (29.5)
1.28 (32.5)
1.53 (38.9)
1.69 (42.9)
1.87 (47.5)
2.13 (54.1)
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-9
E-Mail: [e-mail]