687-348 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Wire to Contact Adapter

687-348
Wire to Contact Adapter
687-348 - Basic
Part Number
Wire Accommodation
6 - 6-8 AWG
10 - 8-10 AWG
12 - 12-14 AWG
16 - 16-18 AWG
20 - 20-22 AWG
22 - 22-24 AWG
0 - 0-4 AWG
687-348 Z2 20 16
Available Finishes
Z2 - Gold Plate
Z3 - Silver Plate
Z4 - Tin Plate
Contact Wire Barrel Size
4, 8, 12, 16, 20, 22
C
Full Radius
.010 Flat
Permissable
D
A
Contact (Ref )
Adapter (687-348)
E
D
Wire (Ref )
Material and Finish
Contact Body: Tellurium copper alloy with gold, silver or tin plate (see part number
development)
Notes
Wire must be crimped or soldered to adapter prior to crimping or soldering electrical contact
to adapter. For dimensional data, please consult factory.
Outside diameter may exceed contact crimp-pot diameter, and is therefore not
recommended for use in rear release contact style connectors.
© 2011 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-23
E-Mail: [e-mail]