660-088 Datasheet, PDF (1/1 Pages) Glenair, Inc. – IP68 Protective Cover

Series 802 AquaMouse™ Submersible
IP68 Protective Cover
660-088 Ordering Information
Protect Connectors From Damage  –
These covers prevent ingress of water and
contamination. Stainless steel plug covers
feature Viton^® O-rings for IP68 sealing
(one meter for one hour). Receptacle
covers have a Viton^® gasket and are made
from marine bronze to minimize galling.
Cover is designed for low PSI connector
protection. For 3500 PSI protection, use
part numbers 667-241 and 667-242
Three Types of Attachment Rings
Choose small diameter eye fittings for
panel attachment. Larger rings fit under
the jam nut or over cable jackets. Split
rings can be installed on fully assembled
cables.
Polyurethane-Coated SST Wire
Rope offers high strength, excellent
abrasion resistance and good flexibility.
O r, choose Teflon^® jacket for high
temperature exposure.
Braided Nylon Rope provides excellent
flexibility and good abrasion resistance,
and can be ordered with slip knot fittings
for easy installation on any size cable.
X
Sample Part Number
Series
(See Table I)
Shell Size
Attachment Type
How To Order
667-088
-9 G 04 -6 B
660-088 = Receptacle Cover
-5, -6, -7, -8, -9, -10,
-12, -14, -15, -21
G = Nylon Rope
H = SST Wire Rope, Teflon® Jacket
N = No Attachment
S = SST Sash Chain
SK = Nylon Rope With Slip Knot
T = SST Wire Rope, No Jacket
U = SST Wire Rope, Polyurethane Jacket
Attachment Code
(See Table II)
Attachment Length (inches)
Alternate Key Position
“SST” = Stainless Steel
Small Ring = 01, 02, 04, 06
Solid Ring = 14 thru 33
Split Ring = 50 thru 72
Omit for attachment Type N (No Attachment) Example
“-6” equals six inch length
Omit for 660-088 receptacle covers
Omit for plug connectors with standard “A” key position, for all
other positions indicate B, C or D
Table I: Cover Style
Table II: Attachment Code
Omit for attachment types N (No Attachment)
and SK (Slip Knot)
Small Ring
01 –­ .126 (3.20) I.D.
02 –­ .145 (3.68) I.D.
04 –­ .188 (4.78) I.D.
06 –­ .197 (5.00) I.D.
Solid Ring
32 ­– .265 (6.73) I.D.
29 –­ .315 (8.00) I.D.
14 –­ .385 (9.78) I.D.
15 –­ .445 (11.30) I.D.
33 –­ .510 (21.95) I.D.
16 –­ .570 (14.48) I.D.
17 –­ .635 (16.13) I.D.
18 –­ .695 (17.65) I.D.
27 –­ .766 (19.46) I.D.
31 ­– .820 (20.83) I.D.
19 –­ .885 (22.48) I.D.
26 –­ .950 (24.13) I.D.
21 –­ 1.135 (28.83) I.D.
22 ­– 1.210 (30.73) I.D.
23 ­– 1.275 (32.39) I.D.
24 - 1.530 (38.86) I.D.
Split Ring
50 –­ .420 (10.67) I.D.
52 –­ .480 (12.19) I.D.
54 –­ .635 (16.13) I.D.
56 –­ .745 (18.92) I.D.
58 –­ .885 (22.48) I.D.
60 –­ 1.010 (25.65) I.D.
64 –­ 1.125 (28.58) I.D.
68 –­ 1.345 (34.16) I.D.
72 –­ 1.438 (36.53) I.D.
660-088
Receptacle Cover
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
X-54
E-Mail: [e-mail]