600-180 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Wire Loom Tool For Use With Split 120-144 Tubing

600-180
Wire Loom Tool For Use With
Split 120-144 Tubing
Wire loom tool for split 120-144 conduit wire insertion
Wire Loom Tool for Easy Wire Insertion  Glenair Series 120-144 Annular Tubing,
in addition to its use in Guardian system assemblies, may also be used without
Guardian fittings in open wire loom applications. Adding wires to split conduit is
easy with the Wire Loom Tool. Simply gather the desired wires into the tool, and
insert into the split conduit. Run the tool through the tubing to complete the
process.
Part Number
600-180-08
600-180-15
600-180-20
600-180-25
600-180-32
Max Bundle Dia.
3/8 in (8mm)
5/8 in (15mm)
3/4 in (20mm)
1 in (25 mm)
1 1/4 in (32mm)
Step 1
Gather desired wires into the tool
Step 2
Insert tool and wires into split conduit
Step 3
Run tool through the tubing
Step 4
Wire insertion is complete
©2011 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
11