English
Language : 

600-055 Datasheet, PDF (1/1 Pages) Glenair, Inc. – 600-055 Calibration Key and 600-072-1 Standard and 600-086-1 Micro Gauges
600-055 Calibration Key and
600-072-1 Standard and 600-086-1 Micro Gauges
3.00 (76.2)
Ref.
.50
(12.7)
600-055 Calibration Key
The 600-055 Calibration Key is designed
for use with the 600-061 and 600-058 Hand
1.75
(44.5)
Banding Tools. Material is black anodized
Ref.
aluminum alloy. One full turn clockwise will
advance the tension range by 25 lbs., and a
counter-clockwise turn will decrease tension
by the same amount. Recommended for
purchase with 600-072-1 and 600-086-1.
Reference: BAND-IT® part number A44699.
.875 (22.2)
.375 (9.5) Approx.
Calibration
Sticker
3.34 (84.8)
Red
Green
Red
Green
.875
(22.2)
2.0 (50.8)
600-072-1 Standard
Tension Gauge
The 600-072-1 Tension Gauge is used
to check and calibrate the Tie-Dex II®
standard hand tool to values noted
on calibration sticker. Constructed of
hardened steel, the gauge's accuracy is
within ±2 lbs.
Reference: BAND-IT® part number A48599.
.875 (22.2)
.375 (9.5) Approx.
Calibration
Sticker
3.34 (84.8)
Red
Red
Green
Green
.875
(22.2)
2.0 (50.8)
600-086-1 Micro
Tension Gauge
The 600-086-1 Micro Tension Gauge
is used to check and calibrate the Tie-
Dex II® micro hand tool to values noted
on calibration sticker. Constructed of
hardened steel, the gauge's accuracy is
within ±2 lbs.
Reference: BAND-IT® part number A47599.
Metric Dimensions (mm) are indicated in parentheses.
© 2008 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
53
E-Mail: sales@glenair.com