English
Language : 

600-006-08 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Circular Backshell Assembly Wrenches and Repacement Insert Pads
600-006, 600-079 & 600-102
Circular Backshell Assembly Wrenches
and Repacement Insert Pads
Product
Series
Basic Number
006 - Standard
(Aluminum)
079 - Anti-Decoupling
(Aluminum)
102 - Standard
(Stainless Steel)
600 - 006 - 16
Dash Number or:
KIT - Complete Kit
A
2.25
(57.2)
Approx.
B Adjustable Stop
(600-079 Only)
APPLICATION NOTES
1. Grips are covered in vinyl.
2. Metric dimensions (mm) are indicated in parentheses.
600-006 and 600-102 (Standard Coupling)
Dash
Shell
A
B
No. Size Ref.
Ref.
Ref.
08
08/09 6.50 (165.1) .617 (15.7)
10
10/11 6.50 (165.1) .734 (18.6)
12
12/13 6.50 (165.1) .858 (21.8)
14
14/15 6.50 (165.1) .984 (25.0)
16
16/17 6.50 (165.1) 1.112 (28.2)
18
18/19 7.00 (177.8) 1.198 (30.4)
20
20/21 7.00 (177.8) 1.323 (33.6)
22
22/23 7.00 (177.8) 1.448 (36.8)
24
24/25 7.00 (177.8) 1.573 (40.0)
28
28
7.00 (177.8) 1.969 (50.0)
600-079 and 600-103 (Anti-Decoupling)
Dash
No.
01
02
03
04
05
06
07
08
10
Shell
Size Ref.
08/09
10/11
12/13
14/15
16/17
18/19
20/21
22/23
24/25
A
Ref.
7.38 (187.5)
7.50 (190.5)
7.50 (190.5)
7.50 (190.5)
7.50 (190.5)
7.75 (196.9)
8.00 (203.2)
8.25 (209.6)
8.25 (209.6)
B
Ref.
.659 (16.7)
.783 (19.9)
.906 (23.0)
1.035 (26.3)
1.140 (29.0)
1.260 (32.0)
1.383 (35.1)
1.510 (38.4)
1.630 (41.4)
Consult Factory for Larger Sizes
Replacement Insert Pads
Approx. Length
600-008 - 3.56 (90.4)
600-078 - 4.00 (101.6)
.38 (9.7) Approx.
.28 (7.1) Approx.
600-008
Fits standard coupling series sizes 08 through
24, color black.
600-078-01 Fits anti-decoupling coupling sizes 09 through
23, color red.
600-078-02 Fits anti-decoupling coupling size 25, color
red.
Replacing Insert Pads in
Backshell Assembly Tools
1. The urethane pad strips are mechanically retained
without adhesive. To remove, grasp an edge of the
strip and pull loose from tool.
2. Beginning with retaining hole adjacent to assembly
tool hinge, insert first retaining knob on strip into hole.
Continue inserting knobs on pad strip into remaining
holes on tool.
3. Using side-cutters or scissors, trim end of pad strip flush
with metal surface of assembly tool. Retain remainder
of strip for replacement in other size assembly tools.
© 2008 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
13
E-Mail: sales@glenair.com