550T010M Datasheet, PDF (1/2 Pages) Glenair, Inc. – D-Subminiature G-Spring Split Backshell

550-010
D-Subminiature
G-Spring Split Backshell
550 T 010 M 2 R1 B 1 F 02-04
Basic Part No.
Cable Entry Style
T = Top
Basic Part Number
Finish Symbol (Page 3)
Shell Size (Table I)
Receptacle Mounting
R1-R9 = Rear Mounting (Table III)
Omit for Front Mounting
Inner Support Ring Dash No.
(Table IV), N = No Support Ring
Cable Entry Dash No. (Table II)
F = Strain Relief, G = Gland Nut
0 = Without EMI Gasket,
1 = With EMI Gasket
Jackscrew Type (Page A-4)
G
.270 (6.9)
1.44 (36.6) Max
Max _{Style G}
Gland Nut
#4-40 UNC
(2 Places)
J
RFI/EMI
Gasket Optional
C
B
H
Cable Range
TABLE IV:
INNER SUPPORT RING
Shell I.D.
Dash
I.D.
O.D.
No. ±.010 (.3) ±.010 (.3)
01 .187 (4.7) .227 (5.8)
Style F
02 .218 (5.5) .258 (6.6)
Strain Relief _1.75
G-
(44.5)
Spring ^Max
03
04
05
06
.250 (6.4)
.281 (7.1)
.312 (7.9)
.343 (8.7)
.290 (7.4)
.321 (8.2)
.352 (8.9)
.383 (9.7)
07 .375 (9.5) .415 (10.5)
08 .406 (10.3) .446 (11.3)
09 .438 (11.1) .478 (12.1)
10 .468 (11.9) .508 (12.9)
11
.500 (12.7) .540 (13.7)
12 .531 (13.5) .571 (14.5)
E
13 .562 (14.3) .602 (15.3)
14 .593 (15.1) .633 (16.1)
15 .625 (15.9) .665 (16.9)
16 .656 (16.7) .696 (17.7)
17 .687 (17.4) .727 (18.5)
18 .718 (18.2) .758 (19.3)
19 .750 (19.1) .790 (20.1)
20 .781 (19.8) .821 (20.9)
21 .812 (20.6) .852 (21.6)
A
22 .843 (21.4) .883 (22.4)
23 .875 (22.2) .915 (23.2)
24 .906 (23.0) .946 (24.0)
25 .937 (23.8) .977 (24.8)
Consult Factory For Larger Sizes
D
© 2004 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-28
E-Mail: [e-mail]