550T004M Datasheet, PDF (1/2 Pages) Glenair, Inc. – EMI/RFI D-Subminiature Split Backshells for Individual or Overall Shielding

550-004
EMI/RFI D-Subminiature Split Backshells
for Individual or Overall Shielding
with Strain Relief
550 T 004 M 2 F0 B 1 F 02
Basic Part No.
Cable Entry Style
T = Top
S = Side
E = End
Basic Part Number
Finish Symbol (Page 3)
Shell Size (Table I)
Cable Entry Dash No. (Table II)
F = Strain Relief, G = Gland Nut
0 = Without EMI Gasket,
1 = With EMI Gasket
Jackscrew Type (Page A-4)
Receptacle Mounting (Right Page)
CC = Cable-to-Cable Mounting
F0 = Front Mounting
R1-R9 = Rear Mounting
1. Metric dimensions
(mm) are indicated in
parentheses.
2. DO NOT USE
CONNECTORS
WITH FLOAT
MOUNTINGS.
3. Overall shield
thickness range:
Max to .062 (1.6).
1.280
H
(32.5) Max
Cable Range
Shell I.D.
1.280 (32.5)
Max
Style F
Strain Relief
S
SIDE
ENTRY
1.000 (25.4) Max
T
TOP
ENTRY
EMI Gasket (Optional)
J
Style G
Gland Nut
E
END
ENTRY
TABLE I: SHELL SIZE & ENTRY STYLE
Shell
Size
1
2
3
4
5
6*
Com’l Entry Style
Shell
T (Ref)
Size Ref Shell I.D.
E/09 .250 (6.4)
A/15 .375 (9.5)
B/25 .475 (12.1)
C/37 .475 (12.1)
D/50 .575 (14.6)
F/104 1.000 (25.4)
Entry Style
E
Shell I.D.
.375 (9.5)
.375 (9.5)
.475 (12.1)
.475 (12.1)
.575 (14.6)
n/a
* Shell Size 6 Available in Top Entry Only.
TABLE II: BACKSHELL DIMENSIONS & CABLE ENTRY
Dash
No.
H
Max
J
Max
Cable Range
Min
Max
02 .968 (24.6) .781 (19.8) .125 (3.2) .250 (6.4)
03 1.046 (26.6) .906 (23.0) .250 (6.4) .375 (9.5)
04 1.156 (29.4) 1.031 (26.2) .312 (7.9) .500 (12.7)
05 1.218 (30.9) 1.156 (29.4) .437 (11.1) .625 (15.9)
06 1.343 (34.1) 1.281 (32.5) .562 (14.3) .750 (19.1)
07* 1.468 (37.3) 1.406 (35.7) .687 (17.4) .875 (22.2)
08* 1.593 (40.5) 1.531 (38.9) .812 (20.6) 1.000 (25.4)
* Available in Shell Size 6 Only
© 2004 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-18
E-Mail: [e-mail]
Rev. 19-AUG-2008