507-011 Datasheet, PDF (1/1 Pages) Glenair, Inc. – RFI/EMI Backshell for MIL-C-81659 Connectors

RFI/EMI Backshell for
MIL-C-81659 Connectors
507-011
507-011 NF 02 L 03 R
Basic Part No.
Entry Location Omit
Finish
B = Cadmium Plate/Olive Drab
M = Electroless Nickel
N = Cadmium Plate/Olive Drab over Nickel Plate
NF = Cadmium Olive Drab over Electroless
Nickel (1000 Hour Salt Spray)
for only one entry
B = Back Entry
F = Front Entry
L = Left Side Entry
R = Right Side Entry
T = Top Entry
Dash No. (Table I)
Entry Location
Dash No. (Table I) Omit
for only one entry
B = Back Entry
F = Front Entry
L = Left Side Entry
R = Right Side Entry
C
T Top Entry
B
A
Die Cast Knurl,
T = Top Entry
Style Mfr. Option (Typ)
.50 (12.7)
Ref
2.00
(50.8)
Max
Typ.
1.50
(38.1)
L Left Entry
R Right
Entry
RFI/EMI Gasket Supplied
TABLE I
1.715 (43.6) Max
1.377 (35.0)
F Front Entry
Threaded in Fitting
Dash A Dia
No.
Min
01 .250 (6.4)
02 .375 (9.5)
03 .500 (12.7)
04* .625 (15.9)
05* .750 (19.1)
B
Dia
.375 (9.5)
.500 (12.7)
.625 (15.9)
.750 (19.1)
.875 (22.2)
* Not Available in L and R Entries
C Dia
Max
.425 (10.8)
.550 (14.0)
.675 (17.1)
.800 (20.3)
.925 (23.5)
.407
(10.3)
1. Metric dimensions (mm) are indicated in parentheses.
2. For effective grounding, connector with conductive
finish should be used.
3. Material/Finish:
Backshell = Al Alloy/Finish Per Option
Hardware = Cres/Passivate
Gasket = Monel and Neoprene
© 5/2001 Glenair, Inc.
CAGE Code 06324
1.437 (36.5)
.938
(23.8)
Typ.
1.195
(30.4)
Max
Typ.
.103 (2.6)Dia,
4 Places
B Back Entry
Threaded in Fitting
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
B-8