463AA001M08 Datasheet, PDF (1/2 Pages) Glenair, Inc. – EMI/RFI Environmental G-Spring Backshell with Strain Relief

CONNECTOR
DESIGNATORS
A-F-H-L-S
ROTATABLE
COUPLING
463-001
EMI/RFI Environmental G-Spring Backshell
with Strain Relief
Rotatable Coupling - Low Profile
463 F S 001 M 16 05 F 6
Product Series
Connector
Designator
Angle and Profile
A = 90
B = 45
S = Straight
Length: S only
(1/2 inch increments:
e.g. 6 = 3 inches)
Strain Relief Style (F, G)
Cable Entry (Table IV)
Shell Size (Table I)
Basic Part No.
Finish (Table II)
Length ± .060 (1.52)
Minimum Order Length 2.0 Inch
(See Note 5)
A Thread
(Table I)
C Typ.
(Table I)
Length *
1.22
(31.0)
Max
Cable
M
Range _{(Table IV)}
STYLE 2
(STRAIGHT
See Note 1)
* Length ± .060 (1.52)
Minimum Order Length 1.5 Inch
(See Note 5)
Shown with Style F
Strain Relief
.88 (22.4) Max
E
(Table III)
F (Table III)
G
(Table III)
STYLE 2
(45° & 90°
See Note 1)
469-001-XX Shield Support Ring
(order separately) is recommended
for use in all G-Spring backshells
(see page 463-8)
Shown with Style F
Strain Relief
H
(Table III)
N
(Table IV)
Shown with
Style G
Strain Relief
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 463 - Page 2
E-Mail: [e-mail]