447HS711XW19 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Composite EMI/RFI Banding Backshell with Strain Relief

447-711
Composite EMI/RFI Banding Backshell
with Strain Relief
and Self-Locking Rotatable Coupling
Product Series
447 - EMI/RFI Non-Environmental
Banding Backshells
Drain Hole Option
(Omit "D" if not required)
Band Option
Band supplied with K
option (Omit for none)
Slot Option
S - Pigtail Termin. Slot
(Omit for none)
Connector Designator
A, F, L, H, G and U
Finish Symbol
(See Table III)
Basic Part
Number
Cable Entry
(See Table IV)
Shrink Boot Option
Shrink boot and
o-ring supplied
with T option
(Omit for none)
TABLE IV: CABLE ENTRY
Entry Entry Dia. X Dia.
Y Dia.
Code ±.03 (0.8) ±.03 (0.8) ±.03 (0.8)
04 .250 (6.4) .51 (13.0) .875 (22.2)
05 .310 (7.9) .51 (13.0) .936 (23.8)
07 .420 (10.7) .51 (13.0) 1.172 (29.8)
447 H S 711 XW 19 13 D S K P T S
09 .530 (13.5) .63 (16.0) 1.281 (32.5)
10 .630 (16.0) .63 (16.0) 1.406 (35.7)
Angle and Profile
S - Straight
W - 90° Elbow
Connector Shell Size
(See Table II)
Shield
Termination Slot
(Omit for none)
Polysulfide Strips
Termination area
free of cadmium,
XW finish only
(Omit for none)
12 .750 (19.1) .63 (16.0) 1.500 (38.1)
13 .810 (20.6) .63 (16.0) 1.562 (39.7)
15 .940 (23.9) .63 (16.0) 1.687 (42.8)
16 1.00 (25.4) .63 (16.0) 1.812 (46.0)
19 1.16 (29.5) .63 (16.0) 1.912 (48.6)
NOTE: Coupling Nut Supplied Unplated
Anti-Decoupling
Device
1.28
(32.5)
.67
X
Dia
(17.0)
Typ.
Entry _Y
Diameter
Anti-Decoupling
Device
F
E
Drain Holes
(Optional)
Shield
Termination
Shrink Sleeve or Boot
Groove, Typ.
G
Slot- Typ.
Raised Configuration
(Optional)
(Mfr's Option)
A
B
C
D
TABLE II: CONNECTOR SHELL SIZE
TABLE III: FINISH
E
Shell Size For
Connector Designator*
E
Symbol Finish Description
F
G
Max Entry
A F/L H G U
08 08 09 – –
10 10 11 – 08
± .06 (1.5) ± .09 (2.3) ± .09 (2.3) Dash No.**
.69 (17.5) .88 (22.4) 1.36 (34.5)
04
.75 (19.1) 1.00 (25.4) 1.42 (36.1)
05
2000 Hour Corrosion
XM Resistant Electroless
Nickel
12 12 13 11 10 .81 (20.6) 1.13 (28.7) 1.48 (37.6)
07
14 14 15 13 12 .88 (22.4) 1.31 (33.3) 1.55 (39.4)
09
2000 Hour Corrosion
Resistant Ni-PTFE,
F
16 16 17 15 14 .94 (23.9) 1.38 (35.1) 1.61 (40.9)
11
18 18 19 17 16 .97 (24.6) 1.44 (36.6) 1.64 (41.7)
13
20 20 21 19 18 1.06 (26.9) 1.63 (41.4) 1.73 (43.9)
15
XMT
Nickel-Fluorocarbon
Polymer. 1000 Hour
Grey^TM
22 22 23 – 20 1.13 (28.7) 1.75 (44.5) 1.80 (45.7)
17
24 24 25 23 22 1.19 (30.2) 1.88 (47.8) 1.86 (47.2)
20
**Consult factory for additional entry sizes available.
Consult factory for O-Ring to be supplied with part less shrink boot.
© 2009 Glenair, Inc.
CAGE Code 06324
2000 Hour Corrosion
XW
Resistant Cadmium/
Olive Drab over
Electroless Nickel
G
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-87
E-Mail: [e-mail]