447AS327XM08 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Composite Standard Profile EMI/RFI Banding Backshell with Qwik-Ty® Strain Relief

447-327
Composite Standard Profile EMI/RFI
Banding Backshell with Qwik-Ty^® Strain Relief
and Self-Locking Rotatable Coupling
A
B
C
CONNECTOR DESIGNATOR:
A MIL-DTL-5015, -26482 Series II, and
-83723 Series I and III
F ^{MIL-DTL-38999 Series I, II}
L ^{MIL-DTL-38999 Series 1.5 (JN1003)}
H ^{MIL-DTL-38999 Series III and IV}
G ^{MIL-DTL-28840}
U ^{DG123 and DG123A}
SELF-LOCKING
ROTATABLE COUPLING
STANDARD PROFILE
Product Series
447 - EMI/RFI Non-Environmental
Banding Backshells
Drain Hole Option
(Omit "D" if not required)
Slot Option
S - Pigtail
Termin. Slot
(Omit for none)
Finish Symbol
(See Table III)
Polysulfide Strips
Termination area
Angle and Profile
S - Straight
W - 90° Elbow
Basic Part
Number
Cable Entry
(See Table IV)
free of cadmium,
XW finish only
(Omit for none)
447 H S 327 XW 19 13 D K P T S
Connector Designator
A, F, L, H, G and U
Connector Shell Size
(See Table II)
Band Option
600-052-1
standard coiled
band supplied
with K option
(Omit for none)
Shrink Boot
Option
Shrink boot
and o-ring
supplied
with T option
(Omit for none)
Anti-Decoupling
Device
D
F
E
Anti-Decoupling
Device
Raised
E
Configuration
(Mfr's Option)
G
Drain Holes
(Optional)
Use MS3367-
1 Tie-Strap or
Equivalent
Pigtail
Termination
Slot
Qwik-Ty^®
F
Strain Relief
1.28
(32.5)
.67 (17.0)
Typ.
X Dia
Entry
Diameter, Typ.
Shrink Sleeve
or Boot
Groove, Typ.
G
© 2009 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-76
E-Mail: [e-mail]