447-425 Datasheet, PDF (1/2 Pages) Glenair, Inc. – EMI/RFI Non-Environmental Band-in-a-Can Backshell

447-425
EMI/RFI Non-Environmental Band-in-a-Can Backshell
With Cable Clamp Strain-Relief
Rotatable Coupling - Standard Profile
Connector Designators:
MIL-DTL-38999 Series I, II (F)
MIL-DTL-38999 Series III and IV (H)
F-H
ROTATABLE
COUPLING
Length
(See Note 2)
Connector Designator
F and H
Basic Number
Finish
Cable Entry
447 F S 425 M 18 12 - 5
Product Series
Contact Style
H - 45°
J - 90°
S - Straight
Shell Size
Length: S only
(1/2 inch increments,
e.g. 8 = 4.00 inches)
A Thread Typ
(See Note 1)
Length
(see Note 2)
.500 (12.7)
Max Typ
See Note 6
STYLE II
(See Note 3)
STRAIGHT
.880 (22.4)
E
Max
SYMBOL J
90°
B Type
(See Note 1)
Knurl Style
Mfr Option Typ
SYMBOL ‘S’
STRAIGHT
G
Cable
Entry
Typ
K Typ L Typ
J Ref
Typ
F
SYMBOL H
45°
H
J Ref
Typ
H
APPLICATION NOTES
1. Standard minimum length for Style I is 1 inch (25.4), Style II
is 1.5 inches (38.1). Consult factory about shorter lengths
(Note: Applies to Symbol S Straight only).
2. When cable diameter exceeds “Max Dash No” in Table I, Style
II will be supplied.
3. For effective grounding, connector with conductive finish
should be used.
4. Glenair Series 600 Backshell Assembly tools are
recommended for assemply and installation.
5. For shield termination see Glenair Drawings 600-050 and
600-052.
6. Material/Finish:
Adapters, Elbows, Coupling Nuts, Ferrule, Clamp - Al
Alloy/See Table I
Hardware - Cres/Passivate
7. Metric dimensions (mm) are indicated in parentheses.
© 2010 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
H-22
E-Mail: [e-mail]