440AH001M08 Datasheet, PDF (1/2 Pages) Glenair, Inc. – EMI/RFI Crimp Ring Adapter Direct Coupling - Standard Profile

440-001
EMI/RFI Crimp Ring Adapter
Direct Coupling - Standard Profile
CONNECTOR
DESIGNATORS
A-B^*-C-D-E-F
G-H-J-K-L-S
* Conn. Desig. B See Note 5
DIRECT COUPLING
A Thread
(Table I)
Length *
K
O-Ring
**
B
(Table I)
440 F S 001 M 16 32-6
Product Series
Connector Designator
Length: S only
(1/2 inch increments:
e.g. 6 = 3 inches)
Angle and Profile
H = 45
J = 90
S = Straight
Basic Part No.
* Length ± .060
(1.52)
Min. Order
Length 1.5 Inch
(See Note 4)
B
(Table I)
J
(Table III)
Cable Entry (Table V)
Shell Size (Table I)
Finish (Table II)
E
(Table IV)
F (Table IV)
L** M**
Length ± .060 (1.52)
Min. Order Length 2.0 Inch
(See Note 4)
STYLE 2
(STRAIGHT
N**
See Note 1)
Crimp Ring
J
G
(Table III) (Table IV)
P** R**
B
(Table I)
** (Table V)
H (Table IV)
See inside back cover fold-out or pages 13 and 14 for Tables I and II.
1. When maximum cable entry (page 22- Introduction) is exceeded, Style 2 will be supplied. (Function S only).
2. For proper installation of crimp ring, use Thomas & Betts (or equivalent) installation dies listed (Table V) for each
dash no.
3. Metric dimensions (mm) are indicated in parentheses.
4. Consult factory for shorter lengths on straight backshells.
5. When using Connector Designator B refer to pages 18 and 19 for part number development.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 440 - Page 8
E-Mail: [e-mail]