440AD001M08 Datasheet, PDF (1/2 Pages) Glenair, Inc. – EMI/RFI Crimp Ring Adapter

CONNECTOR
DESIGNATORS
A-B^*-C-D-E-F
G-H-J-K-L-S
* Conn. Desig. B See Note 4
DIRECT COUPLING
440-001
EMI/RFI Crimp Ring Adapter
Direct Coupling - Split Shell
440 F D 001 M 16 32
Product Series
Cable Entry (Table V)
Connector Designator
Shell Size (Table I)
Angle and Profile
D = Split 90
F = Split 45
Finish (Table II)
Basic Part No.
A Thread
J
E
(Table I) (Table III) (Table IV)
J
G
(Table III) (Table IV)
B Typ.
(Table I)
Split 45°
F (Table IV)
K*
Split 90°
H (Table IV)
N*
TABLE III: FRONT ADAPTER
J Max - Conn. Designator
Shell A-E-F
Size J-H-L-S D-B-G-K
C
08/09 1.180 (30.0) 1.250 (31.8)
10/11 1.180 (30.0) 1.250 (31.8)
12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1)
14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6)
16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6)
28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6)
32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6)
40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6)
L*
M*
P*
R*
* (Table V)
See inside back cover fold-out or pages
13 and 14 for Tables I and II.
1. For proper installation of crimp ring, use Thomas & Betts (or
equivalent) installation dies listed (Table V) for each dash no.
2. Metric dimensions (mm) are indicated in parentheses.
3. Dimensions shown are not intended for inspection criteria.
4. When using Connector Designator B refer to pages 18 and 19
for part number development.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 440 - Page 10
E-Mail: [e-mail]