380MS135 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Mighty Mouse EMI Backshell

Series 80 Mighty Mouse EMI Backshell
380MS135 and 380M*137 Straight, 45° and 90°
Ordering Information
EMI backshells feature an EMI ring for
easy shield termination.
Straight Entry backshells are available
with direct coupling or rotatable
coupling.
Table II: Cable Entry Code
Cable
Entry
Code
Saddle
Clamp
Dia. Fully
Closed
Cable
Entry
Code
Saddle
Clamp
Dia. Fully
Closed
01-
.11 (2.79)
08- .55 (13.97)
02-
.17 (4.32)
09- .61 (15.49)
380MS135
380-137 adapters feature rotatable
coupling nuts.
03-
.23 (5.84)
10-
.67 (17.02)
04- .30 (7.62)
11- .73 (18.54)
05- .36 (9.14)
12- .86 (21.84)
Sample Part Number
How To Order
380MS135
M 07 04- 6 N
06- .42 (10.67) 13- .99 (25.15)
07- .48 (12.19)
Series (See Table I)
Shell Material and Finish
Size Code (See Table V)
Cable Entry Code
(See Table II)
380MS135 = Straight Entry
380MS137 = Straight Entry,
380MB137 = 45° Entry
380MA137 = 90° Entry
UCR = Aluminum / Zinc Cobalt with
Black
ZNU = Aluminum / Zinc Nickel with
Black over Electroless Nickel
M = Aluminum / Electroless Nickel
NF = Aluminum / Cadmium with
Olive Drab
ZN = Aluminum / Zinc-Nickel with
Olive Drab Chromate
MT = Aluminum / Nickel-PTFE
Z1 = Stainless Steel / Passivated
05, 06, 11, 07, 08, 09, 10, 12, 13, 14, 16, 17
01-, 02-, 03-, 04-, 05-, 06-, 07-, 08-, 09-, 10-, 11-,
12-, 13-
For Straight Entry Only.
Table III: Std. Length¹
Size
Code
380MS137
Std. Length
In.
mm.
380MS135
Std. Length
In.
mm.
05
.75
19.05
.63
16.00
06
.75
19.05
.63
16.00
11
.75
19.05
.63
16.00
X
07
.75
19.05
.75
19.05
08
.75
19.05
.75
19.05
09
.75
19.05
.75
19.05
10
.75
19.05
.75
19.05
12
.88
22.35
.88
22.35
13
.88
22.35
.88
22.35
14 1.00 25.40 1.00 25.40
16 1.00 25.40 1.00 25.40
17
1.13
28.70
1.13
28.70
Table IV: Clamp Style
Length (See Table III)
Use Standard lengths listed in Table III for Best Availability
Specify length in .125 (3.18) inch increments (e.g. 6 = .75 in)
Omit = Clamp with Saddle Bars
Clamp Style (See Table IV)
N = Compression Nut, Low Profile
Omit
N
Table I: Backshell Style
Clamp with Saddle
Bars
Compression Nut,
Low Profile
380MS135
Straight Entry,
Direct Coupling
380MS137
Straight Entry,
Rotatable Coupling
380MB137
45° Entry,
Rotatable Coupling
380MA137
90° Entry,
Rotatable Coupling
NOTES
1. Minimum length is .63 Inches. Applies
to straight entry only.
2. Use shrink sleeve or bushing to build
cable to dia. shown under saddle bars.
Materials
• Adapter, Clamp, Nut and Saddles:
Aluminum Alloy 6061-T6 or 300 Series
Stainless Steel
• Hardware: 300 Series Stainless Steel
Dimensions in Inches (millimeters) are subject to change without notice.
© 2014 Glenair, Inc.
Series 80 Mighty Mouse
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
X-31
E-Mail: [e-mail]