380FS131XM08 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Composite Knit-Braid Style

380-131
Composite Knit-Braid Style
EMI/RFI Shield Termination Backshell
with Strain-Relief Clamp and Rotatable Coupling
CONNECTOR DESIGNATOR:
A MIL-DTL-5015, -26482 Series II, and
-83723 Series I and III
F ^{MIL-DTL-38999 Series I, II}
Angle and Profile
S - Straight
Finish Symbol
(See Table III)
Product Series
380 - EMI/RFI Non Environmental
Backshells with Strain Relief
Basic Part
Number
Strain Relief Style
SB - Shrink Boot Groove
SBT - Shrink Boot Groove
with boot supplied
(Omit for none)
A
L ^{MIL-DTL-38999 Series 1.5 (JN1003)}
H ^{MIL-DTL-38999 Series III and IV}
380 H S 131 XM 15 - 01 SB
ROTATABLE COUPLING
Connector Designator
A, F, L and H
1.300 +.02
(33.0 + 0.5)
E
.390 (10.0)
Connector Shell Size
(See Table II)
Cable Entry
(See Table IV)
F
B
D DIA
C
Equally Spaced Holes
to Accommodate Knit Braid 107-044
Self-Locking Rotatable Coupling
Optional Shrink Boot Groove
TABLE II: SHELL SIZE
TABLE IV: CABLE ENTRY
D
Entry
D
E
F
Number
Shell
Shell
Code** +.010 (0.25) ^{+.020 (0.50) +.020 (0.50) of Holes}
Size Max Entry Size Max Entry
00
.268 (6.8) ^{.512 (13.0) .880 (22.4) 2}
A Code** F/L H Code**
01
.354 (9.0) ^{.512 (13.0) .880 (22.4) 2}
08 00 08 09 01
02
.472 (12.0) ^{.512 (13.0) .940 (23.9) 2}
10 01 10 11 02
03
.591 (15.0) ^{.630 (16.0) 1.170 (29.7) 2}
12 02 12 13 03
14 03 14 15 04
04
.709 (18.0) ^{.630 (16.0) 1.280 (32.5) 2}
05
.837 (21.3) ^{.630 (16.0) 1.410 (35.8) 2}
E
16 04 16 17 05
06
.945 (24.0) ^{.630 (16.0) 1.500 (38.1) 2}
18 05 18 19 06
07 1.063 (27.0) ^{.630 (16.0) 1.560 (39.6) 4}
20 06 20 21 07
08 1.191 (30.3) ^{.630 (16.0) 1.690 (42.9) 4}
22 07 22 23 08
09 1.319 (33.5) ^{.630 (16.0) 1.820 (46.2) 4}
24 08 24 25 09
_{Oval Holes, .256 (6.5) x .512 (13.0)} _{Oval Holes, .315 (8.0) x .512 (13.0)}
APPLICATION NOTES
_{Circular Holes, .512 (13.0) Diameter.}
TABLE III: FINISH
F
1. Coupling nut and saddle bars supplied unplated.
2. Metric dimensions (mm) are in parentheses and are for reference only.
3. Consult factory for additional entry sizes available.
4. For angled part requirements, use in conjuncion with Glenair 327-060
Extenders.
5. See Table I in Intro for additional connector front-end dimensions.
Symbol
XM
XMT
XW
Finish Description
2000 Hour Corrosion Resistant Electroless Nickel
2000 Hour Corrosion Resistant Ni-PTFE, Nickel-
Fluorocarbon Polymer. 1000 Hour Grey^TM
2000 Hour Corrosion ResistantCadmium/Olive
Drab over Electroless Nickel
© 2009 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
G
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-53
E-Mail: [e-mail]