340AS002M16 Datasheet, PDF (1/1 Pages) Glenair, Inc. – O-Ring Sealed Shorting Cap Backshell

340-002
O-Ring Sealed Shorting Cap Backshell
Direct Coupling
CONNECTOR
DESIGNATORS
A-B^*-C-D-E-F
G-H-J-K-L-S
* Conn. Desig. B See Note 3
DIRECT
COUPLING
340 F S 002 M 16-5 H 6 A
Product Series
End Fitting Symbol (Table IV)
Connector
Designator
Angle and Profile
S = Straight
Attachment Length
(1/2 inch increments:
e.g. 6 = 3 inches)
Attachment Symbol (Table III)
Basic Part No.
Finish (Table II)
Length (1/2 inch increments:
e.g. 5 = 2.5 inches, 1.0 Inch
Minimum Order Length )
A Thread
(Table I)
B
(Table I)
Length
± .060 (1.52)
O-Ring
Attachment
Length ±.25
(6.4)
Shell Size (Table I)
See inside back cover
fold-out or pages 13 and
14 for unabrdiged
Tables I and II.
.50 (12.7)
Max
E Dia (Table IV)
TABLE IV: END FITTING
Symbol
E Dia.
A
.140 (3.6)
B
.167 (4.2)
C
.182 (4.6)
D
.191 (4.9)
E
.125 (3.2)
F
.218 (5.5)
TABLE III: ATTACHMENT OPTIONS
Symbol
Attachment
C
No attachment, body strap only
D
Bead chain, cres, passivate, with terminal
E
Link chain, cres, passivate, with reverse link
F
Wire rope, nylon jacket, with terminal
G
Nylon rope, with terminal
H
Wire rope, teflon jacket, with terminal
N
Attachment omitted
R
Wire rope, PVC jacket, with terminal
S
#8 Sash chain, cres, passivate
U
Wire rope, polyurethane jacket, with terminal
TABLE II: STANDARD FINISHES
GLENAIR
SYMBOL FINISH
B
Cadmium Plate, Olive Drab
C
Anodize, Black
G
Hard Coat, Anodic
M
Electroless Nickel
NF
Cadmium Plate, Olive Drab Over
Electroless Nickel
See Back Cover for Complete Finish Information
and Additional Finish Options
1. Metric dimensions (mm) are indicated in parentheses.
2. Custom engraving available, consult factory.
3. When using Connector Designator B refer to pages 18 and 19 for part number development.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 34 - Page 3
E-Mail: [e-mail]