311AS034 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Composite Lamp Base Thread EMI/RFI Shield Termination Backshell

311-034
Composite Lamp Base Thread
EMI/RFI Shield Termination Backshell
with Self-Locking Rotatable Coupling Nut
Angle and Profile
S - Straight
W - 90° Elbow
Finish Symbol
(See Table III)
Product Series
311 - EMI/RFI Lamp Base Thread
w/ Shrink Boot Porch
Basic Part
Number
Cable Entry
(See Table II)
311 H S 034 XM 19 07
Connector Designator
A, F, L, H, G and U
Connector Shell Size
(See Table II)
Anti-Decoupling Device
1.25
(31.8)
Lamp Base Thread
Shield Termination
Entry
Diameter
H
TABLE II: CABLE ENTRY
H
Entry Dia.
Dash No. ± .06 (1.5) ±.03 (0.8)
01
02
.45 (11.4)
.52 (13.2)
.13 (3.3)
.25 (6.4)
A
03
.64 (16.3) .38 (9.7)
04
.77 (19.6) .50 (12.7)
05
.92 (23.4) .63 (16.0)
06
1.02 (25.9) .75 (19.1)
07
1.14 (29.0) .81 (20.6)
08
1.27 (32.3) .94 (23.9)
09
10
1.43 (36.3) 1.06 (26.9)
1.52 (38.6) 1.19 (30.2)
B
11
1.64 (41.7) 1.38 (35.1)
F
E
C
NOTES
1. See Table I in Intro for front-end dimensional details.
2. Coupling nut supplied unplated.
3. Metric dimensions (mm) are for reference only.
G
D
H
TABLE II: CONNECTOR SHELL SIZE
Shell Size For
Connector Designator*
E
F
G
TABLE III
Symbol Finish Description
E
Max Entry
A F/L H G U ± .06 (1.5) ± .09 (2.3) ± .09 (2.3) Dash No.**
08 08 09 – –
.69 (17.5) .88 (22.4) 1.19 (30.2)
02
2000 Hour Corrosion
XM Resistant Electroless
Nickel
10 10 11 – 08 .75 (19.1) 1.00 (25.4) 1.25 (31.8)
03
12 12 13 11 10 .81 (20.6) 1.13 (28.7) 1.31 (33.3)
04
14 14 15 13 12 .88 (22.4) 1.31 (33.3) 1.38 (35.1)
05
XMT
2000 Hour Corrosion
Resistant Ni-PTFE,
Nickel-Fluorocarbon
16 16 17 15 14 .94 (23.9) 1.38 (35.1) 1.44 (36.6)
06
18 18 19 17 16 .97 (24.6) 1.44 (36.6) 1.47 (37.3)
07
Polymer. 1000 Hour
Grey^TM
F
20 20 21 19 18 1.06 (26.9) 1.63 (41.4) 1.56 (39.6)
08
22 22 23 – 20 1.13 (28.7) 1.75 (44.5) 1.63 (41.4)
09
24 24 25 23 22 1.19 (30.2) 1.88 (47.8) 1.69 (42.9)
10
28 – – 25 24 1.34 (34.0) 2.13 (54.1) 1.78 (45.2)
11
2000 Hour Corrosion
XW
Resistant Cadmium/
Olive Drab over
Electroless Nickel
**Consult factory for additional entry sizes available.
See introduction for additional connector front-end details.
© 2009 Glenair, Inc.
CAGE Code 06324
G
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
A-5
E-Mail: [e-mail]