290-011 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Stainless Steel Molding Adapters

290-011 and 290-012
Stainless Steel Molding Adapters
STAINLESS STEEL MOLDING ADAPTERS, STANDARD OR WITH OPTIONAL CABLE ENTRY DIAMETERS
How To Order
Sample Part Number
290WS011 –18
Basic Number
Shell Size
290WS011
See Table I
Tips
To select the appropriate molding
adapter, consider the following basic
suggestions to ensure a high integrity,
quality molded termination:
• Select a molding adapter which
will provide adequate inside
working room to accept the
termination envelope, especially
if there are shield terminations,
splices, etc.
How To Order
Sample Part Number
290WS012 –18 12
Basic Number
Shell Size
Cable Entry Size
290WS012
See Table II
See Table II
• If the termination is to be molded
with neoprene or other material
using a transfer molding process,
select the molding adapter cable
entry diameter close to the
outside diameter of the cable or
termination envelope.
Notes
1. Prior to use, lubricate O-rings with
high grade silicone lubricant (Moly-
kote M55 or equivalent).
2. Material:
Adapter - stainless steel.
O-ring - nitrile
290WS011 STANDARD
O-ring
A Thread
1.28 (32.5)
Max
.60
(15.2)
290WS012 OPTIONAL CABLE ENTRY DIAMETERS
Tightening & Staking
Indentations
A Thread
2.00
(50.8)
Max
.60
O-ring (15.2)
B
CD
E
D
Tightening & Staking
Indentations
FG
© 2014 Glenair, Inc.
Series 22 Geo-Marine^®
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
C-2
E-Mail: [e-mail]