289-003 Datasheet, PDF (1/2 Pages) Glenair, Inc. – HiPer-D Accessories

series 28
HiPer-D Accessories
Protective Covers for HiPer-D connectors
289-003, 289-004, 289-019
HiPer-D Protective Covers
Aluminum or stainless steel protective covers fit Glenair Series 28 HiPer-D connectors
and MIL-DTL-24308 connectors. Cover for pin connector fits inside connector shell
and seats on connector face seal for watertight protection. Cover for socket connector
fits over connector shell and has rubber gasket. Attach to panel with optional stainless
steel lanyard and ring terminal.
Pin Cover
Protective Cover Types
Socket Cover
Socket Cover w/ EMI Spring
Hardware Options
Fig. 1
Cover for use with HiPer-D
pin connectors. Part number
289-003.
Sample Part Number
Fig. 2
Cover for use with HiPer-D socket
connectors. Supplied without
EMI spring. Fluorosilicone rubber
gasket. Part number 289-019.
Fig. 3
Cover for use with HiPer-D socket
connectors. Supplied with EMI
spring. Fluorosilicone rubber
gasket. Part number 289-004.
Ordering Information
289-003
2 Z2 P F 4
Basic Part Number
289-003 = Pin Connector Cover (Fig. 1)
289-019 = Socket Connector Cover
(Fig. 2)
289-004 = Socket Connector Cover w/
EMI Spring (Fig. 3)
Fig. 4
Female Jackposts (P)
#4-40 Thread
Stainless Steel
Shell Size
1 = Shell Size 1
2 = Shell Size 2
3 = Shell Size 3
4 = Shell Size 4
5 = Shell Size 5
6 = Shell Size 6
E
ME = Electroless Nickel (RoHS)
MT = Nickel-PTFE (RoHS)
Finish
JF = Cadmium with Yellow Chromate
Z2 = Gold (RoHS)
Z1 = Passivated Stainless Steel (RoHS)
Fig. 5
Male Screwlocks (S)
#4-40 Thread
Stainless Steel
Hardware
Lanyard Type
Lanyard Length
N = No Hardware
P = #4-40 Stainless Steel Jackposts (Fig. 4)
S = Captive SST Hex Head Male Screwlocks (Fig. 5)
N = No Attachment
F = Nylon-Coated SST Lanyard w/ Ring Terminal
H = Teflon®-Coated SST Lanyard w/ Ring Terminal
(Omit for No Attachment)
Length in Inches
E-2 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324