280-087 Datasheet, PDF (1/2 Pages) Glenair, Inc. – HiPer-D® Standard and High-Density Connectors

SERIES 28
HiPer-D^® Standard and High-Density Connectors
280-087 socket connectors with standard M24308 type mounting
flange, integral banding platform and crimp termination
B
Sample Part Number
Basic Part Number
Shell Size-
Contact Arrangement
Shell Finish
Mating Hardware
HiPer-D® socket connectors feature integrated banding platform, crimp, rear-
releaseable size #20 or #22 contacts. Intermateable with standard M24308-type
D-Subminiature connectors, the HiPer-D® features a rugged machined aluminum
shell, waterproof sealing and optional ground springs for improved resistance to
electromagnetic interference. Gold-plated size #20 contacts conform to M39029/64-
369 and accept #20 to #24 AWG wire. Gold-plated size #22 contacts conform to
M39029/58-360 and accept #22 to #28 AWG wire. Contacts are packaged with
connector. Terminate contacts with crimp tools purchased separately. Glass-reinforced
thermoset epoxy insulators, copper alloy retention clips. Fluorosilicone face seal and
rear grommet meet IP67 immersion requirement. 1000 VAC, 5 Amps (#22) or 7.5
Amps (#20).
Ordering Information
280-087S 3S25 ME P
280-087S
See Shell Size - Contact Arrangements Table
ME = Electroless Nickel (RoHS)
Z1 = Passivated Stainless Steel (RoHS)
N = No Hardware (Through-Hole)
L = Jackscrew, Hex Head, Low Profile
S = Screwlock, Male, Hex Head, Low Profile
MT = Nickel-PTFE (RoHS)
ZM = Nickel over Stainless
P = #4-40 Female Jackpost
K = Jackscrew, Slot Head, Extended Length
T = Screwlock, Male, Slot Head, Extended Length
Shell Size - Contact Arrangements
Shell Size-
Contact Arr.
Contact Size and Qty
#20
#22
Standard Density
1S9
9
2S15
15
3S25
25
4S37
37
5S50
50
High Density
1H15
15
2H26
26
3H44
44
4H62
62
5H78
78
6H104
104
Mating Hardware
N
Thru-Hole
No Hardware
P
Female Jackpost
.115/.125
(2.92/3.18)
S
Captive Screwlock,
Hex Head
#4-40 UNC-2A
NUT AND
LOCKWASHER
#4-40 UNC-2B
L
Captive Jackscrew,
Hex Head
RETAINER
RETAINER
#4-40 UNC-2A
K
Slot-Head Extended
Jackscrew
#4-40 UNC-2A
T
Slot-Head Extended
Captive Screwlock
1.1 (28)
MAX
RETAINER
#4-40 UNC-2A
1.1 (28)
MAX
RETAINER
#4-40 UNC-2A
Materials and Finishes
Shell
Aluminum alloy
Contacts
Copper alloy, 50 microin.
gold plated
Insulators
Thermoset epoxy
Retention Clips Copper alloy
Grommet and
Seal
Fluorosilicone rubber
EMI Spring
Copper alloy, nickel plated
Hardware
300 series stainless steel
Specifications
Current Rating #22 5 AMPS, #20 7.5 AMPS
Test Voltage
1000 VAC RMS
Insulation
Resistance
5000 megohms minimum
Operating
Temperature
-65° C. to +200° C.
Ingress Protection IP 67
Shock
300 g.
Vibration,
Random
43.92 g.
B-36
© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Catalog Title
Dimensions in Inches (millimeters) are subject to change without notice.