280-086 Datasheet, PDF (1/2 Pages) Glenair, Inc. – HiPer-D Standard and High-Density Connectors

SERIES 28
HiPer-D^® Standard and High-Density Connectors
280-086 pin connectors with standard M24308 type mounting flange,
integral banding platform and crimp termination
B
Sample Part Number
Basic Part Number
Shell Size-
Contact Arrangement
Shell Finish
Ground Spring
Mating Hardware
HiPer-D® pin connectors feature integrated banding platform, crimp, rear-releaseable
size #20 or #22 contacts. Intermateable with standard M24308-type D-Subminiature
connectors, the HiPer-D® features a rugged machined aluminum shell, waterproof
sealing and optional ground springs for improved resistance to electromagnetic
interference. Gold-plated size #20 contacts conform to M39029/64-369 and accept
#20 to #24 AWG wire. Gold-plated size #22 contacts conform to M39029/58-360
and accept #22 to #28 AWG wire. Contacts are packaged with connector. Terminate
contacts with crimp tools purchased separately. Glass-reinforced thermoset epoxy
insulators, copper alloy retention clips. Fluorosilicone face seal and rear grommet
meet IP67 immersion requirement. 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20).
Ordering Information
280-086P
3S25 ME G P
280-086P
Contact Arrangements are shown in the
adjacent table
ME = Electroless Nickel (RoHS)
MT = Nickel-PTFE (RoHS)
Z1 = Passivated Stainless Steel (RoHS)
ZM = Nickel over Stainless
G = Supplied with EMI Ground Spring
N = No Ground Spring
N = No Hardware (Through-Hole)
P = #4-40 Female Jackpost
L = Jackscrew, Hex Head, Low Profile
K = Jackscrew, Slot Head, Extended Length
S = Screwlock, Male, Hex Head, Low Profile
T = Screwlock, Male, Slot Head, Extended Length
Shell Size - Contact Arrangements
Shell Size-
Contact Arr.
Contact Size and Qty
#20
#22
Standard Density
1S9
9
2S15
15
3S25
25
4S37
37
5S50
50
High Density
1H15
15
2H26
26
3H44
44
4H62
62
5H78
78
6H104
104
Materials and Finishes
Shell
Aluminum alloy
Contacts
Copper alloy, 50 microin. gold plated
Insulators
Thermoset epoxy
Retention Clips
Copper alloy
Grommet and Seal
Fluorosilicone rubber
EMI Spring
Copper alloy, nickel plated
Hardware
300 series stainless steel
Specifications
Current Rating
#22 5 AMPS, #20 7.5 AMPS
Test Voltage
1000 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +200° C.
Ingress Protection
IP 67
Shock
300 g.
Vibration, Random
43.92 g.
N
Thru-Hole
No Hardware
Mating Hardware
P
Female Jackpost
S
Captive Screwlock,
Hex Head
#4-40 UNC-2A
NUT AND
LOCKWASHER
RETAINER
.115/.125
(2.92/3.18)
#4-40 UNC-2B
#4-40 UNC-2A
L
K
T
Captive Jackscrew, Slot-Head Extended Slot-Head Extended
Hex Head
Jackscrew
Captive Screwlock
RETAINER
#4-40 UNC-2A
1.1 (28)
MAX
RETAINER
#4-40 UNC-2A
1.1 (28)
MAX
RETAINER
#4-40 UNC-2A
B-32 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324