280-052P Datasheet, PDF (1/2 Pages) Glenair, Inc. – HiPer-D Combo Connectors

series 28
HiPer-D Combo Connectors
280-052P right angle PC tail combo pin connectors with O-ring flange
for rear panel mounting
The HiPer-D is a high performance version of the M24308-type D-Subminiature
connector. HiPer-D connectors feature improved EMI performance and environmental
sealing. Factory-installed PC tail contacts, integral board standoffs and threaded holes
for attaching to circuit board. Optional ground springs for improved resistance to
electromagnetic interference. Stainless steel EMI shroud. Gold-plated copper alloy
contacts, one-piece machined aluminum shell, glass-reinforced thermoset epoxy
insulator, epoxy potting compound, fluorosilicone face seal and O-ring. 1000 VAC, 7.5
Amps (#20), up to 40 Amps with size #8 power contacts.
Sample Part Number
How To Order
280-052P
3-5p5 me g b b
Basic Part Number
280-052P
Shell Size-
Contact Arrangement
C ^{Shell Finish}
Ground Spring
Mating Hardware
PC Tail Length
Contact Arrangements are shown in the
adjacent table
ME = Electroless Nickel (RoHS)
MT = Nickel-PTFE (RoHS)
JF = Cadmium with Yellow Chromate
Z2 = Gold (RoHS)
Z1 = Passivated Stainless Steel (RoHS)
G = Supplied with EMI Ground Spring
N = No Ground Spring
N = No Hardware
P = #4-40 Female Jackposts
G = Male Guide Pins
B = Female Guide Bushings
A = .125 (3.18) Tail Length
B = .250 (6.35) Tail Length
Contact Arrangements
Shell Size-
Contact Arr.
Contact Size and Qty
#20
#8
1-2p2
2
1-5p1
4
1
2-3p3
3
2-7p2
5
2
2-11p1
10
1
3-5p5
5
3-9p4
5
4
3-13p3
10
3
3-17p2
15
2
3-21p1
20
1
4-8p8
8
4-13p6
7
6
4-17p5
12
5
4-21pa4
17
4
4-25p3
22
3
4-27p2
25
2
5-24p7
17
7
5-36p4
32
4
5-43p2
41
2
5 - 47p1
46
1
Specifications
Current Rating
#20 7.5 AMPS, #8 40 AMPS
Test Voltage
1000 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +200° C.
Shock
300 g.
Vibration, Random
43.92 g.
Mating Hardware
N
No Hardware
#8-32 tapped hole
P
Female Jackposts
#4-40, Non-removable
Shell
Contacts
Insulator
Potting Compound
EMI Spring
Face Seal, O-ring
Hardware
Shroud
Materials and Finishes
Aluminum alloy
Copper alloy, 50 microinches gold
Thermoset epoxy
Epoxy
Copper alloy, nickel plated
Fluorosilicone rubber
300 series stainless steel
Stainless steel
B
Female Guide Bushings
Non-removable
C-18 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
G
Male Guide Pins
Non-removable