280-030P Datasheet, PDF (1/2 Pages) Glenair, Inc. – HiPer-D Standard and High-Density Connectors

series 28
HiPer-D Standard and High-Density Connectors
280-030P float mount pin connectors for blind mating, crimp
termination
B Sample Part Number
Basic Part Number
Shell Size-
Contact Arrangement
Shell Finish
Ground Spring
Mating Hardware
280-030P HiPer-D pin connectors feature stainless steel float bushings for blind
mating. Attach to panel with #4-40 screws (not supplied with connector). Crimp,
rear-releaseable size #20 or #22 contacts. Intermateable with standard M24308-type
D-Subminiature connectors, the HiPer-D features a rugged machined aluminum shell,
rubber seals and optional ground springs for improved resistance to electromagnetic
interference. Threaded holes on the rear of the connector allow direct attachment of
HiPer-D EMI backshells. Contacts are packaged with connector. Terminate contacts
with crimp tools purchased separately. Glass-reinforced thermoset epoxy insulators,
copper alloy retention clips. Fluorosilicone face seal and rear grommet meet IP67
immersion requirement (mated). 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20).
Ordering Information
280-030P
6h104 mt n n
280-030P
Contact Arrangements are shown in the
adjacent table
ME = Electroless Nickel (RoHS)
MT = Nickel-PTFE (RoHS)
JF = Cadmium with Yellow Chromate
Z2 = Gold (RoHS)
Z1 = Passivated Stainless Steel (RoHS)
G = Supplied with EMI Ground Spring
N = No Ground Spring
N = No Hardware (supplied with #8-32 tapped hole)
G = Male Guide Pins
B = Female Guide Bushings
Shell Size - Contact Arrangements
Shell Size-
Contact Arr.
Contact Size and Qty
#20
#22
Standard Density
1S9
9
2S15
15
3S25
25
4S37
37
5S50
50
High Density
1h15
15
2H26
26
3H44
44
4H62
62
5H78
78
6H104
104
Materials and Finishes
Shell
Aluminum alloy
Contacts
Copper alloy, 50 microin. gold plated
Insulators
Thermoset epoxy
Retention Clips
Copper alloy
Grommet, Seal, O-ring Fluorosilicone rubber
Hardware
300 series stainless steel
N
No Hardware
#8-32 tapped hole
Mating Hardware
B
Female Guide
Bushings
G
Male Guide Pins
Specifications
Current Rating
#22 5 AMPS, #20 7.5 AMPS
Test Voltage
1000 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +200° C.
Ingress Protection
IP 67
Shock
300 g.
Vibration, Random
43.92 g.
B-28 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324