280-024P Datasheet, PDF (1/2 Pages) Glenair, Inc. – HiPer-D Standard and High-Density Connectors

series 28
HiPer-D Standard and High-Density Connectors
280-024P right angle PC tail pin connectors with O-ring flange for
rear panel mounting
Right angle printed circuit board HiPer-D pin connectors feature rugged one-piece
machined aluminum shell and stainless steel shroud for improved EMI protection.
Contacts are non-removable size #20 or #22 PC tail contacts. Intermateable
with standard M24308-type D-Subminiature connectors, the HiPer-D features
environmental sealing and optional ground springs for improved resistance to
electromagnetic interference. #4-40 threaded mounting holes simplify panel
attachment. Threaded holes on the bottom of connector allow attachment to circuit
board. Contacts are potted with epoxy. Glass-reinforced thermoset epoxy insulators,
fluorosilicone face seal. 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20).
B Sample Part Number
How To Order
280-024P
4S37 Z2 n b b
Basic Part Number
Shell Size-
Contact Arrangement
Shell Finish
Ground Spring
Mating Hardware
PC Tail Length
280-024P
Contact Arrangements are shown in the
adjacent table
ME = Electroless Nickel (RoHS)
MT = Nickel-PTFE (RoHS)
JF = Cadmium with Yellow Chromate
Z2 = Gold (RoHS)
Z1 = Passivated Stainless Steel (RoHS)
G = Supplied with EMI Ground Spring
N = No Ground Spring
N = No Hardware (supplied with #8-32 tapped holes)
P = #4-40 Female Jackposts
G = Male Guide Pins
B = Female Guide Bushings
A = .125 (3.18) Tail Length
B = .250 (6.35) Tail Length
Shell Size - Contact Arrangements
Shell Size-
Contact Arr.
Contact Size and Qty
#20
#22
Standard Density
1S9
9
2S15
15
3S25
25
4S37
37
5S50
50
High Density
1h15
15
2H26
26
3H44
44
4H62
62
5H78
78
6H104
104
Materials and Finishes
Shell
Aluminum alloy
Contacts
Copper alloy, 50 microin. gold plated
Insulators
Thermoset epoxy
Potting Compound
Epoxy
Face Seal and O-ring Fluorosilicone rubber
Hardware
300 series stainless steel
Mating Hardware
N
No Hardware
#8-32 tapped hole
P
#4-40 Female Jackposts
Specifications
Current Rating
#22 5 AMPS, #20 7.5 AMPS
Test Voltage
1000 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +200° C.
Ingress Protection
IP 67
Shock
300 g.
Vibration, Random
43.92 g.
B
Female Guide Bushings
B-16 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
G
Male Guide Pins