280-021S Datasheet, PDF (1/2 Pages) Glenair, Inc. – HiPer-D Standard and High-Density Connectors

series 28
HiPer-D Standard and High-Density Connectors
280-021S panel mount socket connectors with O-ring mounting flange,
crimp termination
Rear panel mount HiPer-D socket connectors feature crimp, rear-releaseable size #20
or #22 contacts and a flange O-ring for a watertight panel seal. Intermateable with
standard M24308-type D-Subminiature connectors, the HiPer-D features a rugged
machined aluminum shell and environmental sealing. #4-40 threaded mounting
holes simplify panel attachment. Threaded holes on the rear of the connector allow
attachment of HiPer-D EMI backshells. Contacts are packaged with connector.
Terminate contacts with crimp tools purchased separately. Glass-reinforced thermoset
epoxy insulators, copper alloy retention clips. Connector meets IP67 immersion
requirement (mated) . 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20).
B
Sample Part Number
Basic Part Number
Ordering Information
280-021S
280-021S
2H26 Z2
G
Shell Size-
Contact Arrangement
Shell Finish
Mating Hardware
Contact Arrangements are shown in the
adjacent table
ME = Electroless Nickel (RoHS)
MT = Nickel-PTFE (RoHS)
JF = Cadmium with Yellow Chromate
Z2 = Gold (RoHS)
Z1 = Passivated Stainless Steel (RoHS)
N = No Hardware (supplied with #8-32 tapped holes)
P = #4-40 Female Jackposts
G = Male Guide Pins
B = Female Guide Bushings
Shell Size - Contact Arrangements
Shell Size-
Contact Arr.
Contact Size and Qty
#20
#22
Standard Density
1S9
9
2S15
15
3S25
25
4S37
37
5S50
50
High Density
1h15
15
2H26
26
3H44
44
4H62
62
5H78
78
6H104
104
Shell
Contacts
Insulators
Retention Clips
O-ring, Grommet
Hardware
Materials and Finishes
Aluminum alloy
Copper alloy, 50 microin. gold plated
Thermoset epoxy
Copper alloy
Fluorosilicone rubber
300 series stainless steel
Mating Hardware
N
No Hardware
#8-32 tapped hole
P
#4-40 Female Jackposts
Specifications
Current Rating
#22 5 AMPS, #20 7.5 AMPS
Test Voltage
1000 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +200° C.
Ingress Protection
IP 67
Shock
300 g.
Vibration, Random
43.92 g.
B
Female Guide Bushings
B-10 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
G
Male Guide Pins