280-019S Datasheet, PDF (1/2 Pages) Glenair, Inc. – HiPer-D Standard and High-Density Connectors

series 28
HiPer-D Standard and High-Density Connectors
280-019S socket connectors with standard M24308 type mounting
flange, crimp termination
HiPer-D socket connectors feature crimp, rear-releaseable size #20 or #22 contacts.
Intermateable with standard M24308-type D-Subminiature connectors, the HiPer-D
features a rugged machined aluminum shell and waterproof sealing. Gold-plated size
#20 contacts conform to M39029/63-368 and accept #20 to #24 AWG wire. Gold-
plated size #22 contacts conform to M39029/57-354 and accept #22 to #28 AWG
wire. Contacts are packaged with connector. Terminate contacts with crimp tools
purchased separately. Glass-reinforced thermoset epoxy insulators, copper alloy
retention clips. Fluorosilicone rear grommet meets IP67 immersion requirement. Shell
has backshell attachment groove. 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20).
B
Sample Part Number
Basic Part Number
Shell Size-
Contact Arrangement
Shell Finish
Mating Hardware
Ordering Information
280-019S
280-019S
4h62 mE
l
Contact Arrangements are shown in the
adjacent table
ME = Electroless Nickel (RoHS)
MT = Nickel-PTFE (RoHS)
JF = Cadmium with Yellow Chromate
Z2 = Gold (RoHS)
Z1 = Passivated Stainless Steel (RoHS)
N = No Hardware (Through-Hole)
P = #4-40 Female Jackpost
L = Jackscrew, Hex Head, Low Profile
K = Jackscrew, Slot Head, Extended Length
S = Screwlock, Male, Hex Head, Low Profile
T = Screwlock, Male, Slot Head, Extended Length
Shell Size - Contact Arrangements
Shell Size-
Contact Arr.
Contact Size and Qty
#20
#22
Standard Density
1S9
9
2S15
15
3S25
25
4S37
37
5S50
50
High Density
1h15
15
2H26
26
3H44
44
4H62
62
5H78
78
6H104
104
Shell
Contacts
Insulators
Retention Clips
Grommet
Hardware
Materials and Finishes
Aluminum alloy
Copper alloy, 50 microin. gold plated
Thermoset epoxy
Copper alloy
Fluorosilicone rubber
300 series stainless steel
Specifications
Current Rating
#22 5 AMPS, #20 7.5 AMPS
Test Voltage
1000 VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +200° C.
Ingress Protection
IP 67
Shock
300 g.
Vibration, Random
43.92 g.
N
Thru-Hole
No Hardware
Mating Hardware
P
Female Jackpost
S
Captive Screwlock,
Hex Head
#4-40 UNC-2A
NUT AND
LOCKWASHER
RETAINER
.115/.125
(2.92/3.18)
#4-40 UNC-2B
#4-40 UNC-2A
L
K
T
Captive Jackscrew, Slot-Head Extended Slot-Head Extended
Hex Head
Jackscrew
Captive Screwlock
RETAINER
#4-40 UNC-2A
1.1 (28)
MAX
RETAINER
#4-40 UNC-2A
1.1 (28)
MAX
RETAINER
#4-40 UNC-2A
B-6 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324