2470-1048 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Combo Micro-D Filter Connector

2470-1048
Combo Micro-D Filter Connector
for Power Applications
2470-1048 Combo Micro-D Filter Connectors combine the size and
weight advantages of a Micro-D connector with the added ability to
handle higher power needs. Available in C filter configurations, with
solder cup contact termination, PC tails or pre-wired.
D
4x Solder Cup To Accept
24 AWG Stranded Wire
.800
Max
4X
.100
Max
4X
.280
Max
.094
C
D
1.430
1.215
5
3
B
A
.198
.192
.096
2xø _.088
12
9
.381
Max
4x Solder Cup To Accept
16 AWG Stranded Wire
B
3
A
5
C
D
.350
Max
9
12
1.050
Max
Notes
1. Electrical Performance:
• Insulation Resistance: 5000 megohms Min at 100 VDC
• Dielectric Withstand Voltage: 250 VDC
• Capacitance: pins A, B, C, D, 3, 5, 9 and 12 to be 38–56 nF Pi filter (filter
class A). All remaining signal lines are fitted with dummy contacts with
no termination.
Signal current rating: 3 Amps Max
Power current rating: 7.5 Amps Max
2. Assembly to be identified with Glenair’s name, part number and date
code space permitting.
Materials / Finishes:
• Shell - Aluminum Alloy/See Chart
• Insulator - LCP/NA
• Contacts - Copper Alloy/Gold Plated
• Ground Spring - Stainless Steel/Gold Plated
• Socket Interfacial Seal: Flourosilicone
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-34
E-Mail: [e-mail]