247-379 Datasheet, PDF (1/4 Pages) Glenair, Inc. – Edge Board Micro-D Filter Connector

247-379
Edge Board Micro-D Filter Connector
Glenair Edge Board Micro-D Filter Connectors provide EMI solutions in a
miniaturized M83513 Micro-D connector. These connectors feature ceramic
capacitor planar arrays and ferrite inductors.
Choose Pi or C Filter Arrays in eight filter classes and six layouts. Glenair
filtered Micro-D connectors comply with applicable MIL-DTL-83513
requirements and are 100% intermateable with standard connectors.
Choose 9 to 37 Contacts, with standard cadmium or nickel plating on the
connector housing or choose optional finishes such as gold or chem film.
D
Sample Part Number
Series
Shell Finish
Contact Layout
Contact Type
Filter Type
Filter Class
Hardware Option
(See Note 1)
How To Order Edge Board Micro-D Filter Connector
247-379 -2
247-379
Aluminum Shell
1 - Cadmium
2 - Electroless Nickel
9, 15, 21, 25, 31, 37 (See Table II)
P - Pin S - Socket
C - C Filter  P - Pi Filter  N - No Filter
A, B, C, D, E, F, G, N, J (See Table I)
NN - No Jackpost, No Threaded Insert
PN - Jackpost, No Threaded Insert
NU - Threaded Insert Only, No Jackpost
(see Table III)
5 - Gold
Rear Panel Mount Jackpost:
R2U - 0.031" (0.6) Panel
R3U - 0.047" (1.2) Panel
R4U - 0.062" (1.6) Panel
R5U - 0.094" (2.4) Panel
R6U - 0.125" (3.2) Panel
-21 P C A PN
Jackscrew Option:
M - Hex Head Jackscrews
S - Slot Head Jackscrews
(see Table IV)
Filter Class
C Filter
Pi Filter
A
19000-28000
38000-56000
Table I: Micro-D Filter Classes and Performance
B
C
D
E
Capacitance (pF)
16000-22500 9000-16500 4000-6000 1650-2500
32000-45000 18000-33000 8000-12000 3300-5000
F
400-650
800-1300
G
200-300
400-600
J
35–60
70–120
Notes
1. PC tail configuration intended for use with .062 board thickness
2. Electrical Performance:
• Insulation Resistance: 5000 megohms Min at 100 VDC
• Dielectric Withstanding Voltage: 200 VDC
Materials / Finishes:
• Shell - Aluminum Alloy/See Chart
• Insulator - LCP/NA
• Contacts - Copper Alloy/Gold Plated
• Ground Spring - Stainless Steel/Gold Plated
• Socket Interfacial Seal: Fluorosilicone
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Rev. Jun. 2 2014
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-30
E-Mail: [e-mail]