240-077 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Rear Panel Mount Micro-D Filter Connectors

240-077
Rear Panel Mount Micro-D Filter Connectors
Insulated Wire
Glenair Filtered Insulated Wire Micro-D's provide EMI
solutions in a miniaturized M83513 Micro-D connector.
These connectors feature ceramic capacitor planar arrays
and ferrite inductors. Insulated wire is factory precision-
crimped to TwistPin contacts for superior reliability in the most
demanding environments.
Choose Pi or C Filter Arrays in eight filter classes and six
layouts. Glenair filtered Micro-D connectors comply with
applicable MIL-DTL-83513 requirements and are 100%
intermateable with standard connectors.
D
Sample Part Number
Series
Shell Finish
Contact Layout
Contact Type
Filter Type
Filter Class
Wire Gauge
Wire Type
Wire Color/Type
Wire Length
Hardware Option
Plug EMI Ground Spring
O-Ring
Choose 9 to 37 Contacts, with standard cadmium or nickel
plating on the connector housing or choose optional finishes
such as gold or chem film.
How To Order Rear Panel Mount Filter Connectors with Insulated Wire
240-077 -2 -25 S C F -6 K 7 -18 R1 N N
240-077
Aluminum Shell
1 - Cadmium 2 - Nickel
6 - Chem Film 33 - Nickel/PTFE
5 - Gold
9, 15, 21, 25, 31, 37 (See Table II)
P - Pin  S - Socket
C - C Filter  P - Pi Filter
A, B, C,D, E, F, G, J (See Table I)
4 - 24  6 - 26  8 - 28  0 - 30
K - M22759/11  J - M22759/33  E - NEMA HP3-EB (M16878/4)
1 - White  2 - Yellow  5 - Full Color  7 - 10 Color Repeat
18 - 18 Inches
Rear Panel Mount Hardware Option  (See Note 1)
B­ - No Hardware
R1 - 0.032" (0.8) Panel R2 - 0.047" (1.2) Panel
R3 - 0.062" (1.6) Panel
R4 - 0.093" (2.4) Panel R5 - 0.125" (3.2) Panel
R6 - 0.080" (2.0) Panel
G - Ground spring installed  N - No ground spring (N applies to all receptacle assemblies)  (See Note 2)
C - Conductive  N - Non-Conductive (Nitrile)
Filter Class
C Filter
Pi Filter
A
19000-28000
38000-56000
Table I: Micro-D Filter Classes and Performance
B
C
D
E
Capacitance (pF)
16000-22500 9000-16500 4000-6000 1650-2500
32000-45000 18000-33000 8000-12000 3300-5000
F
400-650
800-1300
G
200-300
400-600
J
35–60
70–120
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Rev. Jun. 2 2014
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-26
E-Mail: [e-mail]