240-063 Datasheet, PDF (1/3 Pages) Glenair, Inc. – CB Series “PogoPin” Connectors

CB Series “PogoPin” Connectors
Compact Filter Receptacles for Panel Mounting
Planar filter array receptacles use capacitors and ferrite inductors for attenuation
of unwanted high frequency noise and interference. Select the appropriate mounting
style (jam nut or flange mount) and the desired filter topology (Pi or C). Stainless steel
body and jam nut, with black chromate finish. Available with 7 or 10 contacts. Mates
to standard CB plug connectors. Solder cup or printed circuit board contacts.
A
B
F
G
C
E
D
Style 1
1 Flange mount receptacle for front
panel mounting.
Style 2
2 Jam nut receptacle for rear panel
mounting. Fits up to 3mm panel
thickness.
specifications
Voltage
(DWV)
50 VDC maximum
Current 2.5 Amps maximum
Insulation
Resistance
5000 megohms minimum
Maximum
Wire Size
#20 AWG
Shell
Stainless steel w/ black
chromate
Jam Nut
Stainless steel w/ black
chromate
O-Ring Silicone
Interfacial
Seal
Silicone
Contact Copper alloy, gold plated
Water
MIL-STD-810 Method 512 1
Immersion meter
Ingress
Protection
IP68
Mating
Cycles
5000 cycles minimum
How To Order
CB Filter
Connector
Contact
Arrangement
7 - 7 Contacts
10 - 10 Contacts
Filter Type
C - C Section
P - PI Section
Key Position
7 Pin
1, 2, 3, 4
10 Pin
N, W, X,Y, Z
240-063 - 02 7 P C A 1
Shell Style
02 - Flange Mount
Receptacle
07 - Jam Nut
Receptacle
Contact
Style
P - PC Tail
S - Solder
Cup
Capacitance
Value
(See Table)
CODE
A
B
C
D
E
F
G
CAPACITANCE value
PI - SECTION (pF)
C - SECTION (pF)
38,000 - 56,000
19,000 - 28,000
32,000 - 45,000
16,000 - 22,500
18,000 - 33,000
9,000 - 16,500
8,000 - 12,000
4,000 - 6,000
3,300 - 5,000
1,650 - 2,500
800 - 1,300
400 - 650
400 - 600
200 - 300
© 2007 Glenair, Inc.
All dimensions in millimeters (mm). Information subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
16
E-Mail: [e-mail]