240-030 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Micro-D Filter Connectors

240-030
Micro-D Filter Connectors
Solder Cup
Glenair Filtered Solder Cup Micro-D'sprovide EMI solutions in a
miniaturized M83513 type connector. These connectors feature ceramic
capacitor planar arrays and ferrite inductors. Solder cups accept #26 thru
#30 AWG wire, or specify oversize contacts for #24 gage wire.
Choose Pi or C Filter Arraysin eight filter classes and six layouts.
Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513
requirements and are 100% intermateable with standard connectors.
Choose 9 to 37 Contacts, with standard cadmium or nickel plating on
the connector housing or choose optional finishes such as gold or chem film.
How To Order Filter Micro-D Connectors with Solder Cups
Sample Part Number
240-030
-2
-25
P
P
B
B
Series
Shell Finish
240-030
Aluminum Shell
1 - Cadmium
4 - Black Anodize
6 - Chem Film
2 - Nickel
5 - Gold
Stainless Steel Shell
3 - Passivated
Contact Layout
Contact Type
Filter Type
Filter Class
Hardware
9, 15, 21, 25, 31, 37 (See Table III)
Solder Cup Contacts for #24 AWG or Smaller Wire
P - Pin S - Socket
C - C Filter  P - Pi Filter (See Table II)
A, B, C, D, E, F, G, J (See Table II)
B, P, M, M1, S, S1, L, K, H (See Table I)
D
Table I: Micro-D Mounting Hardware
B
P
M
M1
S
S1
L
K
H
Thru-Hole
Order
Hardware
Separately
Jackpost
Removable
Includes Nut
and Washer
Jackscrew
Hex Head
Removable
E-ring
Jackscrew
Hex Head
Removable
E-ring
Extended
Jackscrew
Slot Head
Removable
E-ring
Jackscrew
Slot Head
Removable
E-ring
Extended
Jackscrew
Hex Head
Non-
Removable
Jackscrew
Slot Head
Non-
Removable
Extended
Threaded
Insert
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-7
E-Mail: [e-mail]