240-030-1-25PP Datasheet, PDF (1/2 Pages) Glenair, Inc. – Micro-D Filter Connectors

240-030
Micro-D Filter Connectors
Solder Cup
Micro-D Solder Cup
Basic Part Number
Filter Connector
Product Code
Shell Finish
(See Table I)
Contact Type
P - Pin
S - Socket
Filter Class
A, B, C, D, E, F or G
(See Table III)
240 - 030 - 2 - 25 P P B P
Number of Contacts
9, 15, 21, 25, 31, 37
Filter Type
P - Pi Circuit
C - C Circuit
Hardware
(See Table II)
A
B
PI FILTER .800 (20.32) MAX.
C
C FILTER .5600 (125.7204) MAX.
D
ED
F
.096/.088 (2.43/2.23) DIA.
.125 (3.18)
MAX,
.093 ± .005
(2.36 ± 0.13)
.322 (8.18) Max
.287 (7.3)
H
Glenair’s Filtered Solder Cup Micro-D's provide EMI
solutions in a miniaturized M83513 type connector. These
connectors feature ceramic capacitor planar arrays and
ferrite inductors. Solder cups accept #26 thru #30 AWG
wire, or specify oversize contacts for #24 gage wire.
Choose Pi or C Filter Arrays in seven filter classes and
eight layouts. Glenair filtered Micro-D connectors
comply with applicable MIL-DTL-83513 requirements
and are 100% intermateable with standard connectors.
Choose 9 to 67 Contacts, with standard cadmium or
nickel plating on the connector housing or choose
optional finishes such as gold or chem film.
© 2008 Glenair, Inc.
CAGE Codes 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
D-6
E-Mail: [e-mail]