233-214 Datasheet, PDF (1/2 Pages) Glenair, Inc. – SuperNine In-Line Gender Changer

Sav-Con^® connector savers
MIL-DTL-38999 Series III
233-214 SuperNine^® In-Line Gender Changer
Sample Part Number
How To Order
233-214
Series / Basic Part No.
Finish
Shell Size - Insert Arrangement
Contact Style
(Plug Side)
Alternate Polarization*
(Plug Side)
Contact Style
(Opposite Plug Side)
Alternate Polarization*
(Opposite Plug Side)
233-214
NF = Cadmium Olive Drab
MT = Nickel PTFE
See Table II
ME = Electroless Nickel
ZR = Black Zinc Nickel
P = Pin, gold, 500 cyles S = Socket, gold, 500 cycles
A, B, C, D, E, N = Normal, U = Universal; See Note 5
P = Pin, gold, 500 cyles S = Socket, gold, 500 cycles
A, B, C, D, E, N = Normal, U = Universal; Review Note 5
See Table II
-NF 17-8 P N S N
Master Key
2.300 Max
2x
Øc
Max
A
G
B
F
EDC
2x
Ø B Max
NOTES
1. Glenair 233-214 connector savers are designed to meet or exceed the
mechanical dimensional, electrical, and environments, requirements
of MIL-DTL-38999, D38999/20 and /24 and MIL-STD-1560 except as
shown and /or noted. Glenair connector savers mate with any QPL
manufacturer's MIL-DTL-38999, series III plugs and receptacles have
the same shell size, insert arrangement, and polarization.
Shell Size
Code
A
B
C
D
Dimensions
Shell Size
ØB Max
9
0.811 (20.6)
11
0.929 (23.6)
13
1.110 (28.2)
15
1.232 (31.3)
ØC Max
0.858 (21.8)
0.984 (25.0)
1.157 (29.4)
1.280 (32.5)
2. For pin/pin and socket/socket, symmetrical layout only.
E
17
1.358 (34.5)
1.406 (35.7)
3. Power to a given contact on one end will result in power to a contact
F
19
1.469 (37.3)
1.516 (38.5)
directly opposite, regardless of identification letter.
G
21
1.594 (40.5)
1.642 (41.7)
4. Electrical safety limits must be established by user. Peak voltage,
H
23
1.720 (43.7)
1.768 (44.9)
switching surge, transient, etc. should be used to determine the safety
application.
5. Alternate polarization 'U' (universal) is a non-standard/non-mill-spec
J
25
1.843 (46.8)
1.890 (48.0)
D
option intended for test lab use only which allows for mating to
any QPL manufacturer's MIL-DTL-38999, series III connector having
the same shell size, insert arrangement, and mating contact size.
Universal connectors are intended for use in testing facilities only
and should be highly evaluated before consideration in another
environment.
© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 94 Sav-Con® Catalog
5
Dimensions in Inches (millimeters) are subject to change without notice.