233-213 Datasheet, PDF (1/3 Pages) Glenair, Inc. – connector savers

Sav-Con^® connector savers
MIL-DTL-38999 Series III
233-213 SuperNine^® Threaded Coupling
233-213 HIGH RELIABILITY WITH THREADED COUPLING
Sample Part Number
How To Order
233-213 -NF 17-8 P N S N
Series / Basic Part No.
Finish
Shell Size - Insert
Arrangement
Contact Style (Plug
Side)
Alternate Polarization
(Plug Side)
Contact Style
(Receptacle Side)
Alternate Polarization
(Receptacle Side)
233-213
NF = Cadmium Olive Drab ME = Electroless Nickel MT = Nickel PTFE ZR = Black Zinc Nickel
See Table I for Additional Finishes
See Table II
P = Pin, gold, 500 cyles S = Socket, gold, 500 cycles
See Notes 3 and 4
A, B, C, D, E, N = Normal, U = Universal; See Note 6
See Table III
P = Pin, gold, 500 cyles S = Socket, gold, 500 cycles
See Notes 3 and 4
A, B, C, D, E, N = Normal, U = Universal; See Note 6
See Table III
B
NOTES
ØC
Max
Master
Key
A
G
B
F
E
C
D
A Thread
1.65
(41.91) Max
ØB
Max
.510 (12.95) Max
Fully Mated
Indicator Band
Color: Red
Shell Size Code
A
B
C
D
E
F
G
H
J
Shell
Size
9
11
13
15
17
19
21
23
25
Dimensions
A Thread
.6250 – 0.1P – 0.3L – TS-2A
.7500 – 0.1P – 0.3L – TS-2A
.8750 – 0.1P – 0.3L – TS-2A
1.0000 – 0.1P – 0.3L – TS-2A
1.1875 – 0.1P – 0.3L – TS-2A
1.2500 – 0.1P – 0.3L – TS-2A
1.3750 – 0.1P – 0.3L – TS-2A
1.5000 – 0.1P – 0.3L – TS-2A
1.6250 – 0.1P – 0.3L – TS-2A
ØB
Max
In
mm
0.811 20.60
0.929 23.60
1.110 28.19
1.232 31.29
1.358 34.49
1.469 37.31
1.594 40.49
1.720 43.69
1.843 46.81
ØC
Max
In
mm
0.858 21.79
0.984 24.99
1.157 29.39
1.280 32.51
1.406 35.71
1.516 38.51
1.642 41.71
1.768 44.91
1.890 48.01
1. Glenair's 233-213 connector savers
are designed to meet or exceed the
mechanical dimensional, electrical,
and environmentsl, requirements
of MIL-DTL-38999, D38999/20,
D38999/26, and MIL-STD-1560 except
as shown and /or noted.
2. Glenair connector savers mate
with any QPL manufacturer's
MIL-DTL-38999, series III plugs and
receptacles that have the same
shell size, insert arrangement, and
polarization.
3. For pin/pin and socket/socket,
symmetrical insert layouts only.
4. Power to a given contact on one
end will result in power to a contact
directly opposite, regardless of
identification letter.
5. Electrical safety limits must be
established by user. Peak voltage,
switching surge, transient, etc. should
be used to determine the safety
application.
6. Alternate polarization 'U' (universal)
is a non-standard/non-mill-spec
option intened for test lab use only
which allows for mating to any QPL
manufacturer's MIL-DTL-38999, series
III connector having the same shell
size, insert arrangement, and mating
contact size.
10
© 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 94 Sav-Con® Catalog
Dimensions in Inches (millimeters) are subject to change without notice.