233-103-H7 Datasheet, PDF (1/1 Pages) Glenair, Inc. – Jam Nut Mount Hermetic Bulkhead Feed-Thru

233-103-H7
Jam Nut Mount Hermetic Bulkhead Feed-Thru
MIL-DTL-38999 Series III Type
Connector Series
233 - D38999 Series III Type
Shell Style
H7 - Jam Nut Mount
Shell Size
09
11
13
15
17
19
21
23
25
Insert Arrangement
Per MIL-DTL-38999 Series III
MIL-STD-1560
Alternate Key
Position
A, B, C, D, E
(N = Normal)
G
.23
Max
H
233 - 103 - H7 Z1 11 - 35 P N - 01
Connector Type
103 - Hermetic Bulkhead
Feed-Thru
Connector Material and Finish
Z1 - CRES, Passivated
ZL - CRES, Nickel Finish
Contact
Termination
P - Pin on
Jam Nut Side
S - Socket on
Jam Nut Side
Panel
Accomodation
01 - .0625″ (Min)
.125″ (Max)
02 - .0625″ (Min)
.250″ (Max)
03 - .0625″ (Min)
.500″ (Max)
A Thread
F Thread
J
Panel
Accom.
D Dia
TABLE I: CONNECTOR DIMENSIONS
E
Recommended Panel Cut-Out
HERMETIC LEAK RATE MOD CODES
Designator
Required Leak Rate
–585A
1 x 10^-10 cc Helium per second
–585B
1 x 10^-9 cc Helium per second
–585C
1 x 10^-8 cc Helium per second
G Dim, OAL
-01 1.650 (41.91) Max
-02
.7500
-03
.8750
H Dim, Max
.889 (22.58)
1.375 (34.93)
1.500 (38.10)
J Dim,
Panel
.125 (3.18)
.062 (1.57)
.250 (6.35)
.062 (1.57)
.500 (12.7)
.062 (1.57)
TABLE II: CONNECTOR DIMENSIONS
ØB
F
SHELL
SIZE
09
A THREAD
0.1 P-0.3L-TS-2
.6250
B
DIA
1.189 (30.20)
C
1.063 (27.00)
D
DIA
.703 (17.86)
.693 (17.60)
E
DIM
.657 (16.69)
.655 (16.64)
F THREAD
METRIC
M17 x 1.0-6g
11
.7500
1.375 (34.93) 1.252 (31.80)
.835 (21.21)
.825 (20.96)
.771 (19.58)
.769 (19.53)
M20 x 1.0-6g
C
A/F
13
.8750
1.500 (38.10)
1.374 (34.90)
1.020 (25.91)
1.010 (25.65)
.955 (24.26)
.953 (24.21)
M25 x 1.0-6g
15
1.0000
1.626 (41.30)
1.500 (38.10)
1.145 (29.03)
1.135 (28.83)
1.085 (27.56)
1.083 (27.51)
M28 x 1.0-6g
17
1.1875
1.752 (44.50)
1.626 (41.30)
1.270 (32.26)
1.260 (32.00)
1.210 (30.73)
1.208 (30.68)
M32 x 1.0-6g
19
1.2500
1.937 (49.20)
1.811 (46.00)
1.395 (35.43)
1.385 (35.18)
1.335 (33.91)
1.333 (33.86)
M35 x 1.0-6g
21
1.3750
2.063 (52.40)
1.937 (49.20)
1.520 (38.61)
1.510 (38.35)
1.460 (37.08)
1.558 (39.57)
M38 x 1.0-6g
23
1.5000
2.189 (55.60)
2.063 (52.40)
1.645 (41.78)
1.635 (41.53)
1.585 (40.26)
1.583 (40.21)
M41 x 1.0-6g
25
1.6250
2.311 (58.70)
2.189 (55.60)
1.769 (44.93)
1.759 (44.68)
1.710 (43.34)
1.708 (43.38)
M44 x 1.0-6g
BA ^M
N
L
C
T
K
D
E
P
R
S
J
F _GH
Insert Arrangement per
MIL-DTL-38999 Series III
MIL-STD-1560
APPLICATION NOTES
1. Power to a given contact on one end will result in power to contact directly
opposite, regardless of identification letter.
2. Hermeticity = less than 1 x 10^-7 cc/sec at one atmosphere. Not for use in liquid
atmosphere.
Contacts – Gold Plated. Pin: alloy 52; Skt.: copper alloy
Insulator – fused vitreous glass/N.A.
Seals – fluorosilicone rubber/N.A.
4. Metric dimensions (mm) are indicated in parentheses.
3. Material/finish:
Shell, nut – CRES/passivated, carbon steel/fused tin or CRES/nickel per QQ-N-290.
© 2010 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
F-10
E-Mail: [e-mail]